Memorizing the Channels. Samsung DVD-V5650B, DVD-V5650

I

N I T I A L

S

E T U P

Memorizing the Channels

Selecting the Video Signal-source

This feature allows you to manually set the DVD-VCR’ s tuner band to Antenna or Cable, whichever you connected to the Antenna In jack during initial setup.

Use this setting only if Auto Setup detected the incorrect tuner band, i.e. channels are coming in on the wrong channel numbers.

1

Press the MENU button.

2

Press the "&# buttons to select Setup, then press the % or ENTER button.

3

Press the "&# buttons to select Channel, then press the

% or ENTER button.

4

Press the % or ENTER button to select Cable TV or

Antenna.

Cable TV: Select this if the DVD-VCR is connected to Cable TV.

- Antenna: Select this if the DVD-VCR is connected to an indoor or outdoor

VHF/UHF antenna.

ENG-26

I

N I T I A L

S

E T U P

Storing Channels in Memory (Automatic Method)

Auto Channel Memory will automatically seek and store all active channels in your area.

5

Press the "&# buttons to select Auto Channel Memory, then press the

% or ENTER button.

The DVD-VCR will automatically search for all available channels in the selected tuner band.

This procedure may take a few minutes to complete.

When finished, the lowest channel found will be displayed.

Note

Do not turn the power of f when Auto

Channel Memory function is proceeding.

If the power is off, Auto Channel Memory should be reset.

Adding and Erasing Channels (Manual Method)

Use this feature if Auto Channel Search missed a channel that you would like to add, or to delete a channel you wish to remove.

6

Press the "&# buttons to select

Channel Add/Delete

, then press the % or ENTER button.

7

Press the CH "&#!buttons to tune in the channel number you wish to add or delete.

Use the number button to select the channel directly.

CHANNEL ADD/DELETE

Select channel : [07] and press [ %] to ADD press [ $] to DELETE

RETURN CH "#

8

Press the $ or % button to delete the channel from your channel list or to add.

Repeat steps 7 to add or to delete additional channels.

Press the MENU button to exit.

CHANNEL ADD/DELETE

Select channel : [07]

(in memory) and press [ %] to ADD press [ $] to DELETE

RETURN CH

"#

ENG-

27

Note

Use the number button to move the channel directly.