advertisement
T5217 _VA 01.1.15 11:25 AM Page 21
3
Begin OTR
OTR(2 : 30)
Press the REC/OTR button on the
TV/VCR as many times as needed.
The recording length will be determined by the number of times you
SP press the REC/OTR button. Each additional push will increase the recording time by
30 minutes. It is set up to 8 hours.
Push(es) Display
1 push
2 pushes
3 pushes
0:30
1:00
Recording length
(normal recording)
30 minutes
60 minutes
Avoid over lap of programs ...
There is a chance that a program will not be recorded. when programs overlap;
•
The program with an earlier start has priority.
•
Once the earliest program finishes, the overlapping programs will begin recording in sequence.
•
The illustration below demonstrates the sequence of recordings.
Recording Sequence
Program 1
10:00AM-11:00AM
Program 2
9:00AM-10:00AM
Program 3
9:30AM-12:00PM
9:00AM 10:00AM 11:00AM
*Recording period is SHADED
12:00PM
17 pushes 8:00 480 minutes
TIMER RECORDING
You may set the TV/VCR to start and end a recording while you are away. You can set 8 programs to record on specific days, daily or weekly within a 1 year period.
In the example below, the timer is being set to record:
DATE: July 6th, 2001
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL: CH61
TAPE SPEED: SP
Make sure ...
•
If a cable box or satellite box is connected with the
TV/VCR you will be limited to record only one channel. And the channel selector on the TV/VCR must be selected to the output channel of the boxes
CH 3 or CH 4 and then the actual channel to be recorded must be selected on the boxes.
•
Clock must be set to the correct time and date before setting the timer.
•
TV/VCR power must be turn on to program it.
•
Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)
•
The channel you want to record is properly set in advance.
1
Select “TIMER PROGRAMMING”
Press the MENU button on the remote control.
Confirm “TIMER PROGRAM-
MING” is pointed by pressing the
PLAY/K button.
B
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
And press the F.FWD/B button.
•
If you have not yet set the clock,
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
“MANUAL CLOCK SET” appears. If so, follow stops [3] to [8] on page 11. Then set the timer recording.
2
Select your desired program position (1~8)
Press the PLAY/K or STOP/L button to select the desired program position.
Then, press the F.FWD/B button.
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
3
Set the channel number
Press the PLAY/K or STOP/L button until the desired channel number appears.
– TIMER PROGRAMMING –
CH DATE
B
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
61 -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
BEGIN END
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
(Example: CH61)
Then, press the F.FWD/B button.
Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or
CH4, then the channel to be recorded is selected on the cable box or satellite box.
4
Select once, every day or weekly recording
For once recording :
– TIMER PROGRAMMING –
Press the PLAY/K (up) button until the desired date appears.
(Example: “7/06” for July 6th).
Then, press the F.FWD/B button.
CH DATE BEGIN END
B
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
61 7/06 FRI -:- -
- -/- - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
- 21 EN
9I03
advertisement
Related manuals
advertisement
Table of contents
- 2 IMPORTANT SAFEGUARDS
- 4 PRECAUTIONS
- 6 FEATURES
- 6 SUPPLIED ACCESSORIES
- 9 PREPARATION FOR USE
- 9 ANTENNA/CABLE CONNECTIONS
- 10 EXTERNAL INPUT MODE
- 10 INSTALLING THE BATTERIES
- 10 SET UP FOR USE
- 11 CLOCK SET UP (AUTO / MANUAL)
- 12 CHANNEL SET UP AGAIN
- 12 DELETING (OR ADDING) CHANNEL
- 13 SELECTING THE LANGUAGE
- 13 DAYLIGHT-SAVING TIME
- 14 TV OPERATION
- 14 WATCHING A TV PROGRAM
- 14 GAME MODE
- 14 DEGAUSSING
- 14 PICTURE CONTROL
- 15 CLOSED CAPTION SYSTEM
- 15 V-CHIP SET UP
- 17 PLAYBACK
- 17 NORMAL PLAYBACK
- 17 AUTO REPEAT PLAYBACK
- 18 SEARCH
- 18 STILL PICTURE
- 19 NOISE CANCEL (in the Still mode)
- 19 VERTICAL HOLD CONTROL
- 19 TRACKING ADJUSTMENT
- 19 RENTAL PLAYBACK
- 19 RECORDING
- 20 NORMAL RECORDING
- 20 RECORDING
- 20 OTR (One Touch Recording)
- 21 TIMER RECORDING
- 22 TIMER PROGRAM EXTENSION
- 23 RECORDING
- 23 AUTO RETURN
- 23 WAKE UP TIMER
- 24 SLEEP TIMER
- 24 COPYING A VIDEO TAPE
- 25 ON SCREEN DISPLAY
- 25 SPECIAL FEATURES
- 25 REAL TIME TAPE COUNTER
- 25 AUTO REWIND-EJECT
- 25 MAINTENANCE
- 26 TROUBLESHOOTING GUIDE
- 27 SPECIFICATIONS
- 27 CABLE CHANNEL DESIGNATIONS
- 28 SUS FUNCIONES
- 30 CONEXIONES DE ANTENA/CABLE
- 30 MODO DE ENTRADA EXTERNA
- 30 INSTALACIÓN DE LAS PILAS
- 31 PRIMERA VEZ
- 31 AJUSTE DEL RELOJ