advertisement
![TIMER PROGRAM EXTENSION. Symphonic WF-13C2 | Manualzz TIMER PROGRAM EXTENSION. Symphonic WF-13C2 | Manualzz](http://s1.manualzz.com/store/data/002103934_1-4c415816e627d07d6edd03389947423d-360x466.png)
T5217 _VA 01.1.15 11:25 AM Page 22
For every day recording : To record a TV program at the same time on the same channel every day. (Example: Monday through
Sunday)
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
61 EVRY DAY -:- -
- - -/- - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
Press the STOP/L (down) button until “EVRY DAY” appears. Then, press the
F.FWD/B button.
10
Finish setting the program
Press the F.FWD/B or REW/s button. The program is now completed.
•
To set another program, repeat steps [2] to [10].
•
Press the MENU button on the remote control to return to original mode.
For weekly recording : To record a TV program at the same time on the same channel every week.
(Example: every Monday)
– TIMER PROGRAMMING –
Press the STOP/L (down) button until “EVRY” and your desired
CH DATE BEGIN END
day of the week appear together.
Then, press the F.FWD/B button.
B
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
61 EVRY MON -:- -
- - -/- - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
11
Set the timer
Press the POWER button to set automatic timer recording. The TIMER REC indicator lights up.
•
You must turn off the TV/VCR to activate automatic timer recording.
If power is not turned off and you continue watching TV, “TIMER REC STANDBY” starts flashing on the TV screen 2 minutes before the programmed start time.
5
Set beginning hour
Press the PLAY/K or STOP/L button until the desired hour appears.
(Example: “ 7, PM” for 7:30PM)
Then, press the F.FWD/B button.
– TIMER PROGRAMMING –
CH DATE
B
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
61 7/06 FRI 7:12
P
M
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
BEGIN END
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
6
Set beginning minute
– TIMER PROGRAMMING –
CH DATE BEGIN END
Press the PLAY/K or STOP/L button until the desired minute appears.
(Example: “30” for 7:30PM)
Then, press the F.FWD/B button.
B
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
61 7/06 FRI 7:30
- -/- - - - -:- -
P
M
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
7
Set end hour
Press the PLAY/K or STOP/L button until the desired hour appears.
(Example: “8, PM” for 8:50PM)
Then, press the F.FWD/B button.
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
61 7/06 FRI 7:30
P
M
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
-:- - - -
-:- - - -
-:- - - -
8:30
P
M
- -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
TIMER PROGRAM EXTENSION
To shift the time schedule of an automatic timer recording.
1)Press the POWER button.
2)Repeat step [1] on page 21.
3)Press the RECORD button and select the desired program using the PLAY/K or STOP/L button.
4)Press the RECORD button again.
Each additional push will shift forward the begin/end time for recording by 10 minutes. When the recording is already in progress, each additional push will shift forward the end time only. If you want to cancel while setting, press the
PAUSE/STILL button on the remote control. The recording time returns to the original time.
NOTE: When you shift forward the time schedule during recording, the recording speed will automatically be set to the SLP mode.
5)Press the F.FWD/B or REW/s button to exit the setting menu. Then press the MENU button on the remote control to return to original mode.
8
Set end minute
– TIMER PROGRAMMING –
CH DATE BEGIN END
Press the PLAY/K or STOP/L button until the desired minute appears.
(Example: “50” for 8:50PM)
Then, press the F.FWD/B button.
B
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
61 7/06 FRI 7:30
P
M
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
-:- - - -
-:- - - -
-:- - - -
8:50
P
M
- -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
9
Set the tape speed
Press the PLAY/K or STOP/L button until the desired tape speed appears. (Example: SP)
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
61 7/06 FRI 7:30
P
M
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
- -/- - - - -:- -
-:- - - -
-:- - - -
-:- - - -
8:50
P
M
SP
-:- - - -
-:- - - -
-:- - - -
-:- - - -
- 22 -
TO CORRECT A PROGRAM
•
While setting a program; press the REW/s button to go back one step and enter the correct numbers using the PLAY/K or STOP/L button.
•
After setting a program;
1)Press the POWER button.
2)Repeat steps [1] - [2] on page 21.
3)Press the F.FWD/B button (or press the REW/s button to go back one step) until the part you want to correct begins flashing, then make the changes pressing the PLAY/K or STOP/L button.
4)Press the POWER button to set automatic timer recording.
EN
9I03
advertisement
Related manuals
advertisement
Table of contents
- 2 IMPORTANT SAFEGUARDS
- 4 PRECAUTIONS
- 6 FEATURES
- 6 SUPPLIED ACCESSORIES
- 9 PREPARATION FOR USE
- 9 ANTENNA/CABLE CONNECTIONS
- 10 EXTERNAL INPUT MODE
- 10 INSTALLING THE BATTERIES
- 10 SET UP FOR USE
- 11 CLOCK SET UP (AUTO / MANUAL)
- 12 CHANNEL SET UP AGAIN
- 12 DELETING (OR ADDING) CHANNEL
- 13 SELECTING THE LANGUAGE
- 13 DAYLIGHT-SAVING TIME
- 14 TV OPERATION
- 14 WATCHING A TV PROGRAM
- 14 GAME MODE
- 14 DEGAUSSING
- 14 PICTURE CONTROL
- 15 CLOSED CAPTION SYSTEM
- 15 V-CHIP SET UP
- 17 PLAYBACK
- 17 NORMAL PLAYBACK
- 17 AUTO REPEAT PLAYBACK
- 18 SEARCH
- 18 STILL PICTURE
- 19 NOISE CANCEL (in the Still mode)
- 19 VERTICAL HOLD CONTROL
- 19 TRACKING ADJUSTMENT
- 19 RENTAL PLAYBACK
- 19 RECORDING
- 20 NORMAL RECORDING
- 20 RECORDING
- 20 OTR (One Touch Recording)
- 21 TIMER RECORDING
- 22 TIMER PROGRAM EXTENSION
- 23 RECORDING
- 23 AUTO RETURN
- 23 WAKE UP TIMER
- 24 SLEEP TIMER
- 24 COPYING A VIDEO TAPE
- 25 ON SCREEN DISPLAY
- 25 SPECIAL FEATURES
- 25 REAL TIME TAPE COUNTER
- 25 AUTO REWIND-EJECT
- 25 MAINTENANCE
- 26 TROUBLESHOOTING GUIDE
- 27 SPECIFICATIONS
- 27 CABLE CHANNEL DESIGNATIONS
- 28 SUS FUNCIONES
- 30 CONEXIONES DE ANTENA/CABLE
- 30 MODO DE ENTRADA EXTERNA
- 30 INSTALACIÓN DE LAS PILAS
- 31 PRIMERA VEZ
- 31 AJUSTE DEL RELOJ