into the remote. Sony CMT-M100

1

Connect the speakers.

Connect the speaker cords to the SPEAKER terminals on the system as the following.

Inserting two R6 (size AA) batteries into the remote

Right speaker cord

2

Connect the FM/AM aerials.

Left speaker cord

Set up the AM loop aerial, then connect it.

E e e

E

Tip

When the remote no longer operates the system, replace both batteries with new ones.

Note

If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

AM loop aerial

Extend the FM lead aerial horizontally

3

Connect the mains lead to the mains.

The demonstration appears in the display.

If the plug of the mains lead does not fit your mains, detach the supplied plug adaptor. To turn on the system, press ?/1.

7