— Manual Recording. Sony CMT-M100

48

Recording an MD on a tape

(continued)

Tips

• When you record on both sides, be sure to start from the top side. If you start from the bottom side, recording stops at the end of the bottom side.

• If you select both sides recording and the tape reaches the end of the top side part-way through a track, the entire track is recorded again from the beginning of the bottom side.

• You can record only your favourite MD tracks with

Programme Play. After step 2, follow the same procedures as from step 1 to 5 of “Programming

MD tracks” on page 17, then go to step 3.

Note

If the tape becomes full during recording, the MD deck and the tape deck stop automatically.

Recording on a tape manually

— Manual Recording

You can record just the portions you like from a CD or an MD on a tape. You can also record a radio programme.

You can use TYPE I (normal) tape.

1

Load a recordable tape.

2

Press FUNCTION repeatedly to select the desired source to record.

3

Press

z

TAPE.

The tape deck stands by for recording.

Press TAPE nN again to record on the bottom side.

4

Press PLAY MODE/DIRECTION repeatedly until

g

appears to record on one side or

h

(or

j

) to record on both sides.

5

Press

X

TAPE, then start playing the desired source to record.

To stop recording

Press x.

Tips

• When you record on both sides, be sure to start from the top side. If you start from the bottom side, recording stops at the end of the bottom side.

• If you select both sides recording and the tape reaches the end of the top side part-way through a track, the entire track is recorded again from the beginning of the bottom side.