AUTODRAIN NANOMIST TECHNOLOGY™ ASSEMBLY. Amcor PCMB-12000EH, PCMB-12000E

1

AutoDrain NanoMist Technology

TM

Assembly

Attach

Window

Slide Bar

Connector to

Exhaust Hose by twisting as shown.

2

Put spiral water pipe into hot air flexible hose.

3

5

Connect the female half of the quick connector at the end of the spiral water pipe to the male part in the hot air outlet pipe.

4

Assemble the hot air hose on the unit.

6

Turn the connector

90 degrees clockwise until it is locked in place.

Clip on the water atomizer at the end of the spiral pipe to the holder.

7

Unfold flexible hose with attached hose adapter connector, and snap into

Window Slide Bar.

8

Only

Required For

Disassembly.

In order to unlock the quick connector, push the tab and turn the connector

90 degrees counter- clockwise.

6