Owner's manual | Amcor AC 706AM Owner`s manual


Add to my manuals
16 Pages

advertisement

Owner's manual | Amcor AC 706AM Owner`s manual | Manualzz

Owner’s

Manual

Portable Air Conditioner

Series

It is important that you read these instructions before using your new purchase and we strongly recommend that you keep them in a safe place for future reference.

Innovative AutoDrain NanoMist Technology

Patent Pending

Table of Contents

Thank You ……………………………………………………… 1

Safety Instructions …………………………………………… 1-2

Specifi cations …………………………………………………… 3

Parts …………………………………………………………… 4

AutoDrain NanoMist Technology ™ Assembly …………………… 5

Positioning ……………………………………………………… 6

Operation …………………………………………………… 7-8

Emptying the Water Container ………………………………… 9

Cleaning …………………………………………………………10

Installation of the Filters …………………………………………10

Storage……………………………………………………………11

Troubleshooting …………………………………………………12

Limited Warranty …………………………………………………14

Thank You!

Thank you for purchasing an AMCOR Portable Air Conditioner.

AMCOR is a leading brand in indoor air treatment. We would like you to enjoy the many benefi ts this unit offers, so please read this manual carefully and take full advantage of the many advanced features that your AMCOR Air Conditioner offers you.

AMCOR has specialized in complete indoor environment control, manufacturing world-class heaters, air conditioners, dehumidifi ers and air purifi ers with innovative technology.

In designing these advanced products, we have listened carefully to our customers and have passed their views on to our research and development laboratories.

We wish you many years of enjoyable use.

After reading this manual, please keep it in a safe place for future reference.

Read this entire instruction manual before use.

Please keep your receipt. Your receipt is your Proof of Purchase and is necessary for warranty service.

Safety Instructions

IMPORTANT!

• The unit is designed for indoor operation.

• Rating: This unit must be connected to a 115V/60Hz grounded outlet.

• The installation must be in accordance with regulations of the country where the unit is used.

If you are in any doubt about the electrical installation, have it checked and if necessary modifi ed by a qualifi ed electrician.

• The air conditioner is safe. However, as with other electrical appliances, use it with care.

• Keep out of the reach of children.

• Do not clean the unit by spraying it or immersing it in water.

• Do not insert any object into the openings of the unit.

• Disconnect the unit from the outlet before cleaning the unit or any of its components.

• Never connect the unit to an electrical outlet using an extension cord.

If an outlet is not available, one should be installed by a licensed electrician.

WARNING!

• Never operate this appliance if it has a damaged cord or plug. Do not lead the cord over sharp edges.

• A damaged supply cord should be replaced by the manufacturer, its service agent or a qualifi ed person

in order to avoid a hazard.

• Any service other than regular cleaning or fi lter replacement should be performed by an authorized

service representative. Failure to do so could result in a loss of warranty.

1

Do not use your air conditioner:

Safety

If the power cable wires are frayed or cut

When small children may be left unattended

On a slope or uneven surface Close to a heat source

This products is not made for

DIY repair

If there is a risk of liquid falling on the unit

Inside unit exposed to the weather outdoors

In a permanent very humid environment

If an extension lead may become overloaded

Where the power cable may be damaged

Where it may be damaged by chemicals

Where there is a risk of interference by foreign objects

Reminder:

Waste electrical products must not be disposed of with household waste.

This product should be taken to our local recycling center for safe treatment.

2

Specifi cations

Model

Cooling Capacity

Power Supply

Power Consumption

Current

Dehumidification

Refrigerant

Compressor

Fan Speeds

Thermostat

Timer

Dimensions

Weight

NanoMax

Series

7,000 - 12,000 BTU/h

115V / 60Hz

680 - 830 watts

6.8 - 7.9A

42 - 50 Pints / 24h

R22

Rotary

2

62º - 90º F

1 - 12 Hours

12"W x 15"D x 30"H

50 lbs.

Subject to modifications without prior notice.

Please refer to the rating label for greater precision.

3

12

16

10

Parts

13

11

15

14

1. Handle

2. Control panel

3. Air outlet

4. Air inlet with filter

5. Exhaust hose with adapter

6. Power cord hanger

7. Exhaust air outlet

8. Water stopper (plug inside)

9. Casters

10. Adjustable Window Slide Bar

11. Flexible Drain Hose

12. Exhaust hose

13. IR Ergonomic Remote Control

14. Exhaust Hose Window

Slide Bar Connector

15. Insulation tape

4

4

5

6

7

4

8

9

1

2

3

1

3

5

7

AutoDrain NanoMist Technology

Assembly

Stretch end of the hose slightly.

Attach Window

Slide Bar

Connector to

Exhaust Hose by twisting as shown .

2

Connect the female half of the quick connector at the end of the spiral water pipe to the male part in the hot air outlet pipe.

4

Stretch end of the hose slightly.

Assemble the hot air hose on the unit by screwing in clockwise.

6

Unfold fl exible hose with attached hose adapter connector, and snap into

Window Slide Bar.

8

Put spiral water pipe into hot air fl exible hose.

Turn the connector

90º clockwise until it is locked

in place.

Clip on the water atomizer at the end of the spiral pipe to the holder.

Only

Required For

Disassembly.

In order to unlock the quick connector, push the tab and turn the connector counter clockwise.

5

Positioning

This unit can easily be moved from one room to another. In doing so keep this in mind:

• The air conditioner must stand upright on an even surface.

• Do not position near bath, sink, or other permanent wet or damp area.

• Keep unit at least 18" from wall, curtains, draperies, to insure adequate air circulation.

2 a

1

2 b

Installing Exhaust Hose to Window Slide Bar

After assembling Innovative AutoDrain NanoMist Technology ™ per instructions on page 5, make sure hose is fi rmly attached to oval connecter that fi ts into window slide bar.

Snap hose connecter into window slide bar opening. See Illustration 1.

Extend window slide bar to fi t your window opening, either vertical or horizontal, depending on how the window opens. See Illustrations 2a-2b.

Important

The fl exible exhaust hose can be extended from 12" to 60" for mounting.

This length has been designed especially according to the specifi cations of the air conditioner.

Do not use an extension or exchange for a different hose as that may lead to malfunctioning.

The exhaust air must fl ow freely, any blockage can lead to overheating of the air conditioner.

Take care to prevent any kink or bend in the exhaust hose.

6

Operation

COOL

FAN

MODE

TIMER

TIMER

UP DOWN

LOW

HIGH

FAN

SPEED

WATER FULL

COMP.

ON/OFF

3 2 5 4 1

1. ON/OFF

Press the

ON

/

OFF

-button to switch the unit on or off.

2. Setting the Timer

Press the

TIMER

button, which will start the timer counter function.

Each press of the timer button will advance the timer setting by 1 hour, for setting

1-12 hours. If you pass the desired hour setting, you must advance the numbers completely through 12, to start timer count from 1. When set, the

TIMER LED

will light up.

When the set hours have elapsed, the unit will turn off automatically.

The display will show the hour(s) remaining when you press the

TIMER

button.

By pressing the

TIMER

button but without turning the unit on, you can pre-set in how many hour(s) the unit will switch on automatically.

3. Setting the Operating Mode

Select the required operating mode:

COOL

,

FAN

, or

AUTO

. The corresponding

LED

will lit.

In

AUTO

mode the unit will select cooling or fan depending on the ambient temperature.

4. Fan Speed

Select the fan speed, the corresponding

LED

will lit:

LOW

or

HIGH

.

5. Increase UP or DOWN

When the unit is ON, the display always shows the room temperature.

Press button UP or DOWN to see the current set temperature and adjust if necessary, in the range of 62ºF to 90ºF. After 8 seconds, the room temperature will be displayed.

Warning lights COMPRESSOR and WATER FULL

When the water container is full, the unit automatically stops, the warning light

WATER FULL will fl ash to signal that the container must be emptied (see page 9, “Emptying The

Water Container”).

When the unit is cooling, the compressor light will be on. If this light is off further cooling is not needed at this time, or the compressor may be de-icing its coils.

The fan can still be on.

7

Operation

Remote Control

The air conditioner responds to all signals that are sent by the remote control. Two AAA-batteries are required to use the remote control.

Point the remote control hand set towards the control panel of the unit and press the relevant button, the red

LED

on the hand set will fl ash whenever a button is pressed.

Note: the air fl ow direction can not be adjusted with the remote control.

Air Flow

Adjust the left-right direction of the outfl owing air by turning the roller on the front of the air outlet grill.

Adjust the up/down air fl ow by rotating the air outlet grill.

Important:

• The compressor will start approximately 3 minutes after the

unit is turned on (this will help prolong the life of the

compressor). After switching the unit off, please wait at least

3 minutes before turning the unit back on.

• The compressor will switch off when the room temperature

is lower than the set temperature. The fan will however

continue to work. When ambient temperature rises above

the set temperature, the cooling will resume.

8

Emptying The Water Container

This portable AC features the

Innovative AutoDrain NanoMist Technology ™

Very little excess water should accumulate. During the process of cooling, some of the water accumulated is actually used to cool the unit internally, making it run more effi ciently. Both this evaporative technology and Innovative AutoDrain NanoMist Technology™ are features not found in most portable air conditioners.

Switch off the unit and remove the plug from the outlet.

• Position a fl at container or dish on the fl oor under the drain hole.

Do not allow the water to drip continuously into the

container as it might easily overfl ow.

• Remove the drain knob.

• Remove the rubber plug, the water will fl ow in the

container. When this is nearly full, replace the plug to

stop the water fl ow and empty it. Repeat this process

until all water has been removed.

• Replace the rubber plug into the drain hole fi rmly,

the

FULL LED

should not fl ash any longer.

• Replace the drain knob.

Rubber plug Drain knob

9

Cleaning

Always unplug the unit from the power supply (wall outlet) before beginning the cleaning.

Housing

Use a soft, damp cloth to wipe the body clean. Never use strong chemicals, oil-based products, detergents, chemically treated cloths or other cleaning solutions. These could possibly damage the housing.

Filter

Use a vacuum cleaner or tap the fi lter lightly to remove loose dust and dirt from the fi lters and then rinse them thoroughly under running water (not warmer than 104°F).

Dry thoroughly before replacing.

Notice! Never operate the air conditioner without the fi lters.

Installation of Carbon Filter

It is recommended to replace an active carbon fi lter at the start of the season.

• Remove the top fi lter frame from

the unit by pulling it out.

• Separate the fi xer from

the fi lter frame.

• Insert the active carbon fi lter into the

fi lter frame, underneath the tabs.

• Re-fi t the fi lter frame inside the unit.

10

Storage

This Portable AC features the

Innovative AutoDrain NanoMist Technology ™ .

Very little excess water should accumulate. If any water accumulates, refer to “Emptying the Water Container” on page 9.

• Drain the condensed water (if any) completely.

• Clean or change the fi lter.

• Put the unit on a warm day in fan mode for a couple of hours to

ensure that the inside can dry out completely.

• Store the power cable as shown, protect the unit against dust (put

back into its original carton) and store in a dry place not accessible

• To protect the unit against dust, store in a dry place not accessible

• Do not stock heavy objects on top of the unit.

11

Troubleshooting

Never try to repair or dismantle the air condition yourself. Incompetent repairs result in loss of warranty and can endanger the user and the property.

Problem Cause

The air conditioner does not function.*

The air conditioner does not seem to perform.

No power supply. Make sure the green light on the plug is lit.

Is the power light fl ashing?

Is the water full LED lit?

The unit is in direct sunlight.

Windows or doors open, many people or a heat source in the room.

The filter is dirty.

Air inlet or air outlet blocked.

Room temperature lower than the selected value.

The unit is noisy.

Unit stands uneven.

The compressor does not work.

The remote control does not function.

The overheat protection may be activated.

Distance too great.

Remote control signal not detected by the control panel.

The batteries are drained.

Solution

Connect to a functioning outlet and switch on.

Empty the drain pan.

Close curtains.

Close doors and windows, place an extra air conditioner.

Clean or replace the fi lter.

Remove the blockage.

Change temperature selection.

Set at the lowest possible setting: 62°F.

Place on an even, solid surface (less vibrations).

Wait 30 minutes until the temperature has decreased, then turn on the unit again.

Make sure the remote control is correctly aimed at the control panel.

Replace the batteries.

* If you plug in the Air Conditioner, and there is no green light on the plug, press the reset button on the LCDI plug. The green light should be lit, indicating that the air conditioner is getting power from the electrical outlet.

If the plug continues to trip (which is a USA national safety standard feature) and the green light goes off, the cord may be damaged preventing you from resetting the unit. For your safety, contact a licensed electrician.

RESET

TEST

Reset Button

Test Button

Green Light

12

Don’t forget to register your Amcor purchase online, and view our broad selection of innovative products.

www.amcorgroupusa.com

13

One Year Limited Warranty

(5 years for Compressor Only

)

Amcor, Inc. (“Amcor”) warrants the original retail purchaser (“Purchaser”) purchasing in the United

States that the Amcor product with which this warranty is enclosed is free from defects in materials and workmanship.

Amcor’s sole obligation under this warranty is to replace, or at Amcor’s discretion, to repair, free of charge, all defective parts, for a period of one (1) year from date of original purchase. (5 years for

Compressor Only) ANY IMPLIED WARRANTY OF MERCHANTABILITY IS SIMILARLY LIMITED

TO ONE (1) YEAR -(5 years for Compressor Only) FROM DATE OF ORIGINAL PURCHASE AND

NO ACTION BASED UPON ANY IMPLIED WARRANTY OF MERCHANTABILITY OR OTHER-

WISE MAY BE COMMENCED AFTER EXPIRATION OF ONE (1) YEAR -(5 years for Compressor

Only) FROM DATE OF ORIGINAL RETAIL PURCHASE. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation -(5 years for Compressor Only) may not apply to you.

The provisions of this warranty shall not apply to any product which in Amcor’s judgment has been

(1) subject to misuse or neglect. (2) damaged in an accident. (3) used for a purpose for which it was not designed, or (4) repaired or altered in any way that adversely affected its performance or reli-ability.

To obtain warranty service, the defective product or part must be shipped or delivered to: Amcor’s authorized service center. All postage, insurance and shipping charges are the responsibility of the

Purchaser and are not included in this warranty.

AMCOR NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO ASSUME FOR IT ANY

OTHER ( LIABILITY IN CONNECTION WITH ITS PRODUCTS, THERE ARE NO WARRANTIES

WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. NO RESPONSIBILITY

IS ASSUMED FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES THAT MAY RESULT FROM

THE USE OF AN AMCOR PRODUCT, NOR FOR THE DAMAGES DUE TO ACCIDENT, ABUSE,

LACK OF RESPONSIBLE CARE, THE AFFIXING OF ANY UNAUTHORIZED ATTACHMENT,

LOSS OF PARTS, OR USE AT A VOLTAGE OTHER THAN SPECIFIED. Some states do not allow the exclusion of limitation of incidental or consequential damages, so these limitations may not apply to you.

Amcor disclaims all liabilities for defects or damages caused by use of replacement parts obtained from or by service at any service center other than Amcor’s authorized service center.

This warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state.

Product: AMCOR Portable Air Conditioner Model: NanoMax ™ Series

Date Purchased:__________________________________ Production Code:________

QUESTIONS? Call 866-361-2233

www.amcorgroupusa.com

Dear Customer: Please keep this warranty for your record.

DO NOT return it.

14

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement