Workstation specifications. Stratasys uPrint, uPrint Plus, UPRINT SE PLUS, UPRINT SE

Stratasys uPrint is a personal 3D printer that offers a range of advanced features and capabilities. With its user-friendly design and powerful software, uPrint makes it easy to create high-quality 3D models and prototypes. Whether you're a designer, engineer, or hobbyist, uPrint has the tools you need to bring your ideas to life.

Here are some key features that make uPrint the ideal choice for personal 3D printing:

Fast and accurate printing: uPrint uses advanced FDM technology to produce high-quality prints in a fraction of the time of other 3D printers.
Versatile material options: uPrint supports a wide range of materials, including ABSplus, allowing you to create models with different properties and textures.
Easy-to-use software: uPrint comes with powerful software that makes it easy to design, prepare, and print 3D models. No prior CAD experience is required.

With its exceptional features and capabilities, uPrint is the perfect 3D printer for anyone who wants to create high-quality 3D models and prototypes quickly and easily.

Workstation specifications

Operating System

Processor

RAM

Hard Disk

Monitor graphics resolution

Video Card

Microsoft Windows XP, Microsoft Windows Vista or Microsoft Windows 7

Minimum: 2.4 GHz

Faster processors will shorten job processing times

Minimum: 1GB (2GB for Windows Vista or Windows 7)

Recommended: 2GB (3GB for Windows Vista or Windows 7)

Installation: 90MB

Minimum: 1024x768

Recommended: 1280x1024 (wide screen acceptable)

Required: OpenGL compliant accelerated graphics card

Recommended: Hardware support for OpenGL

Recommended 128MB graphics card memory

Power specifications

Source (nominal) 100–240VAC ~ 12 - 7A 50/60Hz 1200W

Do not use an extension cord or a power strip, using these can possibly cause intermittent power issues.

Environmental specifications

Temperature range

◦

C to 30

◦

C (59

◦

F to 86

◦

Relative humidity range 30 to 70 percent, non condensing

Heat emission 2550 BTU/hr typical

Acoustic specifications

Idle sound pressure at bystander

55 dBA

Operating sound pressure at bystander

62 dBA

Key Features

Fast and accurate printing
Versatile material options
User-friendly software
Compact and portable
Automatic material loading and unloading
Built-in camera for remote monitoring
Wi-Fi and Ethernet connectivity for easy network integration
Touchscreen display for intuitive operation
Extensive library of pre-designed models and templates
Regular firmware updates with new features and improvements

Questions & Answers

2024-06-14

Z Z F

How do I set the network IP address of my uPrint/uPrint Plus printer?

1. Obtain your static network address from your Network Administrator. 2. Press Maintenance on the display panel, then System, then Set Network. 3. Enter the IP address, default gateway, and subnet mask. 4. After setting the final digit of the IP address, move the cursor one more place to the right and set the Netmask (NM) and Gateway (GW) addresses. 5. Press Done, then Yes to confirm the changes and reset the network.

Related manuals

Frequently Answers and Questions

How do I connect my uPrint to a computer?

You can connect your uPrint to a computer using a USB cable or over a Wi-Fi network.

What materials can I use with my uPrint?

uPrint supports a wide range of materials, including ABSplus, PLA, and PETG.

How do I clean and maintain my uPrint?

Regular cleaning and maintenance are important to keep your uPrint running smoothly. For daily maintenance, simply wipe down the exterior of the printer with a clean cloth. For more thorough cleaning, refer to the user manual for instructions.

Can I print multiple objects at the same time?

Yes, uPrint supports multi-part printing, allowing you to print multiple objects simultaneously.

What is the maximum size of object I can print with my uPrint?

The maximum build volume of uPrint is 203 x 152 x 152 mm (8 x 6 x 6 inches).

Workstation specifications. Stratasys uPrint, uPrint Plus, UPRINT SE PLUS, UPRINT SE

Workstation specifications

Power specifications

Environmental specifications

Acoustic specifications

Key Features

Questions & Answers

Z Z F

How do I set the network IP address of my uPrint/uPrint Plus printer?

Related manuals

Stratasys

180-00110 uPrint

µ-Dimension

180-00108 uPrint

Stratasys

Dimension Elite

Stratasys

UPRINT SE PLUS

µ-Dimension

SST 1200es

Stratasys

Dimension BST 1200

Dimension

BST 1200

Dimension

SST 768

Stratasys

UPRINT SE

Frequently Answers and Questions

How do I connect my uPrint to a computer?

What materials can I use with my uPrint?

How do I clean and maintain my uPrint?

Can I print multiple objects at the same time?

What is the maximum size of object I can print with my uPrint?

Table of contents