- Computers & electronics
- Computer components
- Chassis components
- Computer cooling components
- Hardware cooling accessories
- Proware
- EP-4643J-S6S6
- Owner's manual
advertisement
▼
Scroll to page 2
of
48
![2.2 JBOD Controller Module. Proware EP-4643J-S6S6 | Manualzz 2.2 JBOD Controller Module. Proware EP-4643J-S6S6 | Manualzz](http://s1.manualzz.com/store/data/004217146_1-c46d4d436df92acc83aaefdfc6783f72-360x466.png)
2.2 JBOD Controller Module
64 Bays SAS to SAS/SATA JBOD Subsystem
2.2.1 JBOD Controller Panel
JBOD Controller Module
User Manual
13
64 Bays SAS to SAS/SATA JBOD Subsystem
Part
SAS In Port
SAS Expansion Port
RS-232 Port
Description
Use to connect to SAS HBA or to RAID subsystem’s SAS Expansion Port.
Use to connect to the SAS In Port of another
JBOD subsystem.
Use to upgrade the firmware of the JBOD controller. Connect the RJ11-to-DB9 serial cable to your system’s serial port.
Indicator
Link LED
Activity LED
Color
Green
Description
Indicates expander has connected or linked.
Blinking
Blue
Indicated the expander is busy and being accessed.
14
User Manual
advertisement
Related manuals
Download
PDF
advertisement
Table of contents
- 4 Safety Guidelines
- 4 Controller Configurations
- 4 Packaging, Shipment and Delivery
- 5 Unpacking the Shipping Carton
- 8 1.1 Technical Specifications
- 9 2.1 Main Components
- 9 2.1.1 Front View
- 10 2.1.1.1 LCD Display Panel LED
- 11 2.1.1.2 HDD Status LEDs
- 12 2.1.2 Rear View
- 13 2.2 JBOD Controller Module
- 13 2.2.1 JBOD Controller Panel
- 15 2.3 Power Supply Fan Module (PSFM)
- 17 2.3.1 PSFM Panel
- 18 2.4 Fan Module
- 20 2.4.1 Turbo Fan
- 21 2.5 Expander Module
- 21 2.5.1 Expander Module Panel
- 22 2.6 Disk Drive Installation into the Disk Slot
- 28 3.1 Installing the Rails and Mounting into Rack
- 41 3.2 Removing the Disk Array from the Rack
- 43 3.3 Preparing the JBOD and Connecting to RAID Subsystem
- 43 3.4 Preparing the JBOD and Connecting to SAS HBA in Host System
- 44 3.5 Powering On
- 45 3.6 Powering Off
- 46 4.1 Upgrading the JBOD Controller Firmware