- Computers & electronics
- Computer components
- Chassis components
- Computer cooling components
- Hardware cooling accessories
- Proware
- EP-4643J-S6S6
- Owner's manual
advertisement
▼
Scroll to page 2
of
48
![3.2 Removing the Disk Array from the Rack. Proware EP-4643J-S6S6 | Manualzz 3.2 Removing the Disk Array from the Rack. Proware EP-4643J-S6S6 | Manualzz](http://s1.manualzz.com/store/data/004217146_1-c46d4d436df92acc83aaefdfc6783f72-360x466.png)
64 Bays SAS to SAS/SATA JBOD Subsystem
3.2 Removing the Disk Array from the Rack
1. Remove the six screws in the front corner.
Front Left Side Front Right Side
2. Remove the power supplies in the rear and the disk drives from the disk slots.
User Manual
41
64 Bays SAS to SAS/SATA JBOD Subsystem
3. Carefully pull the subsystem.
4. Push the white lock to release the subsystem from the rail.
42
User Manual
advertisement
Related manuals
Download
PDF
advertisement
Table of contents
- 4 Safety Guidelines
- 4 Controller Configurations
- 4 Packaging, Shipment and Delivery
- 5 Unpacking the Shipping Carton
- 8 1.1 Technical Specifications
- 9 2.1 Main Components
- 9 2.1.1 Front View
- 10 2.1.1.1 LCD Display Panel LED
- 11 2.1.1.2 HDD Status LEDs
- 12 2.1.2 Rear View
- 13 2.2 JBOD Controller Module
- 13 2.2.1 JBOD Controller Panel
- 15 2.3 Power Supply Fan Module (PSFM)
- 17 2.3.1 PSFM Panel
- 18 2.4 Fan Module
- 20 2.4.1 Turbo Fan
- 21 2.5 Expander Module
- 21 2.5.1 Expander Module Panel
- 22 2.6 Disk Drive Installation into the Disk Slot
- 28 3.1 Installing the Rails and Mounting into Rack
- 41 3.2 Removing the Disk Array from the Rack
- 43 3.3 Preparing the JBOD and Connecting to RAID Subsystem
- 43 3.4 Preparing the JBOD and Connecting to SAS HBA in Host System
- 44 3.5 Powering On
- 45 3.6 Powering Off
- 46 4.1 Upgrading the JBOD Controller Firmware