advertisement
▼
Scroll to page 2
of 66
7. Advanced Feature
Static Route※
Build static routes within an internal network. These routes will not apply to the Internet.
Route: Enter the IP of the specified network.
Route Mask: Enter the subnet mask to be used for the specified network.
Next Hop IP: Enter the IP address to the specified network.
Inter Face: Select the inter face.
RIP(Routing Information Protocol) ※
Establish dynamic routes within an internal network. These routes will not apply to the Internet.
Enable Authentication/Authentication Password: All the boxes in this RIP group should be filled in the same password if ticked.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 Introduction
- 5 Product Overview
- 6 Hardware Description
- 8 Installation and Applications
- 8 Network Interface
- 8 Gateway Assigned with a Public IP Address
- 8 Gateway in a NAT network
- 9 Gateway assigned with a Public IP Address and serving as an IP sharing device
- 10 Telephone Interface Description
- 10 Example for Line Ports
- 11 Setting the Gateway through IVR
- 11 IVR (Interactive Voice Response)
- 13 IVR Functions Table
- 15 IP Configuration Settings—Setting IP Configuration of WAN Port
- 16 Recorded Voice File
- 18 Setting a Gateway with WEB Browser
- 18 Network Settings (WAN)
- 23 Network Settings (LAN)
- 25 QoS Settings
- 26 NAT/DDNS
- 28 Telephony Settings
- 36 Calling Features
- 37 Advanced Options
- 38 Line Settings
- 39 Codec
- 39 Fax Settings
- 41 Digit Map
- 42 Phone Book
- 42 Speed Dial
- 43 Caller Filter
- 43 ACL for Management
- 43 CDR Settings
- 44 Language
- 44 Transit Call Control
- 45 Long-Distance Control Table
- 45 Long Distance Exception Table
- 46 CPT/Cadence Settings
- 46 Busy Tone Cadence Measurement
- 46 UDT Detection
- 51 Save Settings
- 52 System Information
- 53 RTP Packet Summary
- 53 STUN Inquiry
- 53 Ping Test
- 54 Backup/Restore
- 55 Provision Settings
- 55 System Operations (Save Settings)
- 56 Software Upgrade
- 56 Logout
- 57 IP Sharing Functions
- 60 Coding Principle
- 60 Instruction
- 60 Dialed Number Processing Flow
- 62 Advanced Feature
- 62 Static Route
- 62 RIP(Routing Information Protocol)
- 63 Port filtering
- 63 IP Filtering
- 64 MAC Filtering
- 64 Virtual Server
- 65 URL Filter
- 65 Special Applications
- 66 DoS Prevention Settings