advertisement
▼
Scroll to page 2
of
14
DIGITAL CONDUCTIVITY METER SERVICE MANUAL
Figure 4
Figure 5
Figure 6
The information contained in the accompanying document is proprietary and confidential, and may not be copied in any manner whatsoever without prior written consent of Emcee Electronics,
Inc. The document and the material therein may not be used for any purpose other than that intended by Emcee Electronics, Inc.
COPYRIGHT 2002 EMCEE ELECTRONICS, INC.
REVISION DATE: FEBRUARY 23, 1996
PAGE 10 OF 14
advertisement
Key Features
- Handheld, battery-operated
- Measures fuel conductivity
- High-range ohmmeter
- Probe included
- Digital display
- Calibration feature
Related manuals
Frequently Answers and Questions
What is the purpose of the Emcee Digital Conductivity Meter Model 1152?
The Emcee Digital Conductivity Meter Model 1152 is used to measure the conductivity of fuel samples.
How do I calibrate the Emcee Digital Conductivity Meter Model 1152?
The calibration procedure is described in detail in section 7.0 of the manual. It involves using a CU substitution box and adjusting specific potentiometers on the meter.
What are the battery requirements for the Emcee Digital Conductivity Meter Model 1152?
The meter uses three 6 volt Alkaline Nema 1414A batteries (Emcee P/N 152-90-5341). Replacing them with any other battery type will void the CSA and UL Intrinsically Safe Rating.