advertisement
8.1.6 EMAIL NOTIFICATIONS
The remote monitoring interface includes an automatic e-mail notification: e-mails are sent to recipients in case of alarm events or warnings in the modulator.
The notification e-mail indicates the main parameters of the unit (also present in the front panel menu) and a summary of the history of the equipment (events log file).
1) Configuration of the notification system
Fig. 8.6 – E-mail notifications page
The explanation of all the fields is indicated in the table present in next page.
MOZART SERIES –FM Exciters/Transmitters - U
SER
’
S
M
ANUAL
79 /113
Fields
Station ID
Account Username
Account Password
Server SMTP url
Description
Insert the name that will appear as the sender of the notification e-mail.
Insert the email account username.
Insert the email account password.
Insert the Server SMPT url of the email account.
Ex: smtp.gmail.com (google SMTP server)
Server SMTP port
Security and
Authentication
Enter the port of the SMTP server.
Ex: 25, 465 or 587 (typical ports)
Select “TLS/SSL” checkbox to enable the TLS/SSL protocols.
Select “Use name and password” checkbox if the SMTP server requires the authentication.
Destination Address
Enter the email addresses of notification recipients.
Note: Up to 5 emails are allowed.
Press the “SAVE CONFIG” button to save the configurations and press “OK” when the following pop-up window will appear:
Fig. 8.7 – E-mail notifications saving settings
MOZART SERIES –FM Exciters/Transmitters - U
SER
’
S
M
ANUAL
80 /113
The content of the e-mail notification is provided in the following format:
Fig. 8.8 – E-mail notifications content format
In the notification the information indicated are:
Transmission frequency (in MHz)
Forward power (in Watt)
Reflected power (in Watt)
Heat-sink temperature (in degrees Celsius)
DC voltage to supply each RF board (in Volt)
Absorbed current of each RF board (in Ampere)
Information about the type of event that generated the notification is present in the attached file
log_events.txt with following format:
[TIME DATE] [EVENT TYPE]
Fig. 8.9 – Log event .txt
This log file has a capacity of 200 events listed for lines. Exceeded this number all the events are automatically erased and a new file is started. The complete log file can be accessed also from the web page.
MOZART SERIES –FM Exciters/Transmitters - U
SER
’
S
M
ANUAL
81 /113
2) You can test the notification system using the button “TEST EMAIL”, in this way, a test email will be sent to the address set in the “Destination address 1” field.
Fig. 8.10 – TEST EMAIL button
Fig. 8.11 – Confirmation message in the received test email
MOZART SERIES –FM Exciters/Transmitters - U
SER
’
S
M
ANUAL
82 /113
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 8 GENERAL INFORMATION
- 8 NOTICES
- 9 ELECTROCUTION
- 10 (WEEE)
- 10 LABELS
- 12 FM EXCITER GENERAL DESCRIPTION
- 13 CHARACTERISTICS
- 13 HIGHLIGHTS
- 14 CONTROL
- 16 HIGHLIGHTS
- 16 PROTECTIONS
- 23 TECHNICAL SPECIFICATIONS
- 26 INSTALLATION AND ACTIVATION
- 26 CHECK
- 27 CONNECTIONS
- 28 MENU DESCRIPTION
- 28 VISUALIZATION
- 28 START PAGE
- 28 Main menu
- 30 Output Modulation
- 30 Left and Right channels level
- 30 AES-EBU Left and Right channels level
- 31 Auxiliary channels level
- 31 Voltages and current
- 32 Heatsink temperature
- 32 Device information
- 34 Frequency Set menu
- 34 Power Set menu
- 35 Operative Mode menu
- 38 Audio Selection menu
- 41 Sensitivity menu
- 42 Presetting menu
- 49 Alarms menu
- 56 Memory menu
- 60 History menu
- 62 Generals menu
- 66 FRONT PANEL
- 68 Status leds
- 69 Audio leds
- 70 Control leds
- 71 Command leds
- 72 REMOTE I/O (OPTIONAL)
- 73 WEB SERVER (OPTIONAL)
- 74 PAGES
- 74 Main page
- 75 Login page
- 76 Settings page
- 77 Presettings page
- 78 Memories scheduling
- 79 Email notifications
- 83 Log page
- 84 Administration page
- 86 Modulator Upgrade page
- 87 Webserver Upgrade page
- 88 PROCEDURES
- 88 Upgrading the modulator firmware
- 92 Upgrading the webserver board firmware
- 96 PROTOCOL
- 96 Management Information Base MIB
- 99 Message trap and inform
- 100 Commands and State
- 101 TOP VIEWS
- 111 APPENDIX 1: EXTERNAL REFERENCE
- 112 APPENDIX 2: STEREO OPTION INSTALLATION