Mozart-30 Manual

In the TRAP TYPE box select the message type desired, trap or inform. If inform is selected, the timeout the agent waits (if no answer from the manager) before re-send the inform message can be set in the INFORMS TIMEOUT box, the number of inform retransmission can be set in INFORMS

RETRIES box.

The messages trap/inform have to be enable and can be enable singly. The enable is provided to the

OIDs (fmSTEventEnable folder):

EVENT OID

fmSTTransmitterOpModeEventEnable .1.3.6.1.4.1.19831.1.1.3.1.2.1.1

DESCRIPTION

8.3.3 COMMANDS AND STATE

Commands and State available through SNMP are summed in the following table:

EVENT OID TYPE DESCIPTION

fmSTTransmitterOpMode .1.3.6.1.4.1.19831.1.1.3.1.1.1 fmSTRFPresent fmSTFault

.1.3.6.1.4.1.19831.1.1.3.1.1.2

.1.3.6.1.4.1.19831.1.1.3.1.1.3

Read and Write

Read only

Read only

1=ON, 2=OFF

1=Present, 2=Not Present

1=Fault, 2=No Fault fwSTWarning fmSTLocalMode

.1.3.6.1.4.1.19831.1.1.3.1.1.4

.1.3.6.1.4.1.19831.1.1.3.1.1.5

Read only

Read only

1=Warning, 2=No Warning

1=Local, 2=Remote

The commands are accepted by the unit only in remote mode and if the community strings are correctly set for both read and write operations.

The community read/write strings have to be set both to the agent and manager units. In the webpage can be set in the Administration menu.

MOZART SERIES –FM Exciters/Transmitters - U

SER

’

S

M

ANUAL

100 /113