Mozart-30 Manual

11 APPENDIX 2: STEREO OPTION INSTALLATION

In case of installation of the stereo option in the Mozart series after receiving the unit, the board that will be sent you is the one here below:

1. With the equipment switched off, remove the cover of the side where the main audio board is installed (in the Mozart 30/50 it’s the top side, in the other models it’s the bottom side).

2. Position the stereo board on the top of the Left & Right audio board as showed in the photos here below, taking care that the pins are correctly positioned in the connectors

MOZART SERIES –FM Exciters/Transmitters - U

SER

’

S

M

ANUAL

112 /113

3. Press it to fix the board on the Left & Right audio board

4. Fix the board with the screw on the center

The software recognize automatically the presence of the board, so fix from the front panel menu all the parameters related to the stereo signal as for your necessity.

MOZART SERIES –FM Exciters/Transmitters - U

SER

’

S

M

ANUAL

113 /113