advertisement
▼
Scroll to page 2
of
63
CINEO C1020 Introduction
Installation and Startup
i
Be certain to follow the safety guidelines in chapter Important Notes.
Before turning on the system
Unpack the parts and make sure that every item at the packing list is included.
If you find
shipping damage or
discrepancies between the contents of the package and the packing list or
defects, please inform your vendor or Wincor Nixdorf International GmbH (WN) sales location immediately.
Also provide the packing list and the packing list item and serial numbers for the effected unit.
Please find the Serial Number beside the main power switch at the side or at the back of the housing.
6
advertisement
Related manuals
advertisement
Table of contents
- 6 Introduction
- 6 About this manual
- 6 Warranty
- 7 Unpacking and Checking the System
- 7 ESD (Electrostatic Sensitive Devices)
- 8 Fixing the device on the floor
- 8 Removing the Transportation Locks
- 9 Important Notes
- 10 LCD Displays
- 11 Installation and Startup
- 11 Before turning on the system
- 12 Connecting the CINEO C1020
- 12 Start up
- 12 CINEO C1020 Stand Alone
- 12 Power Connection and LAN Support
- 13 Disconnecting the System from the Mains
- 13 CINEO 1020 as Peripheral Device
- 13 Power Connection and LAN Support
- 14 Disconnecting the System from the Mains
- 15 Components CINEO C1020
- 16 Coin Module
- 16 Device Overview
- 16 Coin Module open
- 17 Operating Unit open
- 18 Access to the Coin Module
- 20 Basic Operation
- 20 General
- 20 Function elements
- 20 Status LED
- 21 Acoustic signals
- 21 Modes
- 22 Coin In
- 22 Coin dispensing
- 22 Emptying the overflow box
- 23 Malfunctions
- 23 Error messages and warnings
- 27 Eliminate Coin Jams
- 27 Coin entry Tank
- 28 Separator Disk
- 29 Coin Validator
- 30 Transport Chain Conveyor
- 32 Emptying a Coin Hopper
- 33 Cleaning Instruction
- 33 Generell Informations
- 34 Coin Validator
- 37 Hopper Sensor
- 40 Filling the Cash Drawer Money Compartment
- 41 Filling Scheeme
- 41 KA21
- 41 Cash Bases Flip Lid 460
- 42 Printer TH230+
- 42 Safety Instructions
- 42 Caution:
- 43 Overview
- 44 Operator Panel
- 44 FEED
- 44 POWER
- 44 PAPER
- 44 ERROR
- 45 OPEN
- 46 Maintenance of the TH230+
- 46 Print Head / Rubber Roller Cleaning
- 48 Paper Roll Exchange
- 50 Paper Near End Sensor Adjustment
- 51 Connector Variants
- 51 Energy-saving Mode
- 52 Technical Data
- 53 Paper Specification
- 54 Print Area
- 55 Display BA83
- 55 Operator Panel Module
- 55 USB Interface
- 55 On Screen Display
- 56 LED (Front Side of the Module)
- 56 ON/OFF Button
- 57 EPC (Central Unit)
- 57 External Connectors / Services at the rear Side
- 58 Appendix
- 58 Technical Data
- 59 Environmental Requirements
- 60 Approved Cleaning Materials: Order Numbers
- 61 Certifications of the manufacturer
- 61 Note on Radio Interference Suppression
- 61 FCC-Class A Declaration
- 62 Recycling the CINEO C1020