advertisement
CINEO C1020 User Manual Appendix
Display BA83
The TFT LCD flat panel display is an XGA-compatible 15-inch flat panel display which is absolutely flicker free and free from radiation. It is designed for a resolution of max. 1024 x 768 pixel. Application programs should be used with this resolution!
Operator Panel Module
Find the operator panel at the back side of the module (see arrow).
USB Interface Menu Scrolling back forward
USB Interface
Connect here peripherals during operation, e.g. a keyboard.
On Screen Display
Menu
Via the menu you can set loudness, brightness, contrast or color
ON/OFF
50
CINEO C1020 User Manual
Scrolling
The arrows serve for scrolling forwards or backwards in the menu items.
LED (Front Side of the Module)
Dark Power Off
Green
Orange
Power On
Power save Mode
Red
The LED flasjs in the standby mode
Out of Range
ON/OFF Button
With this button you can switch off the device.
Appendix
51
advertisement
Related manuals
advertisement
Table of contents
- 6 Introduction
- 6 About this manual
- 6 Warranty
- 7 Unpacking and Checking the System
- 7 ESD (Electrostatic Sensitive Devices)
- 8 Fixing the device on the floor
- 8 Removing the Transportation Locks
- 9 Important Notes
- 10 LCD Displays
- 11 Installation and Startup
- 11 Before turning on the system
- 12 Connecting the CINEO C1020
- 12 Start up
- 12 CINEO C1020 Stand Alone
- 12 Power Connection and LAN Support
- 13 Disconnecting the System from the Mains
- 13 CINEO 1020 as Peripheral Device
- 13 Power Connection and LAN Support
- 14 Disconnecting the System from the Mains
- 15 Components CINEO C1020
- 16 Coin Module
- 16 Device Overview
- 16 Coin Module open
- 17 Operating Unit open
- 18 Access to the Coin Module
- 20 Basic Operation
- 20 General
- 20 Function elements
- 20 Status LED
- 21 Acoustic signals
- 21 Modes
- 22 Coin In
- 22 Coin dispensing
- 22 Emptying the overflow box
- 23 Malfunctions
- 23 Error messages and warnings
- 27 Eliminate Coin Jams
- 27 Coin entry Tank
- 28 Separator Disk
- 29 Coin Validator
- 30 Transport Chain Conveyor
- 32 Emptying a Coin Hopper
- 33 Cleaning Instruction
- 33 Generell Informations
- 34 Coin Validator
- 37 Hopper Sensor
- 40 Filling the Cash Drawer Money Compartment
- 41 Filling Scheeme
- 41 KA21
- 41 Cash Bases Flip Lid 460
- 42 Printer TH230+
- 42 Safety Instructions
- 42 Caution:
- 43 Overview
- 44 Operator Panel
- 44 FEED
- 44 POWER
- 44 PAPER
- 44 ERROR
- 45 OPEN
- 46 Maintenance of the TH230+
- 46 Print Head / Rubber Roller Cleaning
- 48 Paper Roll Exchange
- 50 Paper Near End Sensor Adjustment
- 51 Connector Variants
- 51 Energy-saving Mode
- 52 Technical Data
- 53 Paper Specification
- 54 Print Area
- 55 Display BA83
- 55 Operator Panel Module
- 55 USB Interface
- 55 On Screen Display
- 56 LED (Front Side of the Module)
- 56 ON/OFF Button
- 57 EPC (Central Unit)
- 57 External Connectors / Services at the rear Side
- 58 Appendix
- 58 Technical Data
- 59 Environmental Requirements
- 60 Approved Cleaning Materials: Order Numbers
- 61 Certifications of the manufacturer
- 61 Note on Radio Interference Suppression
- 61 FCC-Class A Declaration
- 62 Recycling the CINEO C1020