CHAPTER 8 RF MODEM/TELNET HOST
CONFIGURATION
RF MODEM/TELNET HOST CONFIGURATION
General Host Options Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-3
Telnet Protocol Options Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-3
8
RF Modem/Telnet Host Configuration 8 - 3
General Host Options Screen
Field
Name
Enabled
Emulation and protocol
Terminal range
Auto terminal number assignment (not supported by Direct
TCP)
Description
The unique name of the host.
Default: Unnamed Host
When selected the host task is started when the TekTerm Server starts.
Emulation and protocol combination for this host.
Select: MODEM/Telnet
Terminal number range that communicates with this host.
Range: 1 to 3840. For S900L range is 1 to 50.
Default: 1 to 32
For information on selecting the terminal range see Chapter 19: “Setting Terminal
Numbers on the General Host Options Screen”
When selected, TekTerm Server assigns terminal numbers to all mobile devices that use this session.
When not selected, terminal numbers must be assigned on the mobile devices.
Default: Selected.
Telnet Protocol Options Screen
Field
First Terminal Listen
Port
Description
The lowest port number on which the TekTerm Server listens for Telnet connections initiated by the host.
When set to 0 (zero) this option is disabled.
Values: 0 to 32767
Default: 0
