Chapter 4.
Extract Phone Data
4.1. Overview
Select Extract Phone Data from the main menu in order to copy data from a phone (the source) to a PC, USB or SD card (the target).
Use this function to extract phonebook, SMS text messages, pictures, etc. from mobile phone memory to a USB disk drive, SD card or directly to a
PC.
The UFED guides you each step of the way during this process.
4.2. Flowchart
There are only slight differences in the procedure when the target is a USB disk drive or a PC. Both procedures are described below. Refer to the procedure relevant to you.
12 UFED System
Chapter 4 –Extract Phone Data
4.3. Extract Phone Data to USB Disk Drive or SD Card
Follow the steps below to perform a data extraction from a mobile phone to a USB disk drive or an SD card.
1. Main Menu
Select Extract Phone Data from the main menu.
Use the
▲▼
keys to move between options. Press OK or
►
to continue.
2. Source Vendor
Select the vendor (manufacturer) of the source phone.
Use the
▲▼
keys to move between options. Press OK or
►
to continue.
3. Source Model
Select the source phone model.
NOTE: If you do not know the model, you can often find the phone model on a sticker beneath the battery.
Use the
▲▼
keys to move between options. Press OK or
►
to continue.
To return to the previous menu, press
◄.
User Manual 13
Chapter 4 –Extract Phone Data
4. Source Memory
Select the source memory location you wish to extract.
Use the
▲▼
keys to move between options. Press OK to select the currently highlgithed option, or press F2 to select all. Press
►
to continue.
NOTE: Some phones do not allow access to the SIM card data via the data cable. In these cases, you will be prompted during the process to remove the SIM card and insert it into the SIM Card Slot.
5. Source Link
This step determines how the phone will connect to the UFED. This message appears only if the phone supports more than one connection method
(Cable, Bluetooth or IrDA-Infrared).
Use the
▲▼
keys to move between options. Press OK or
►
to continue.
NOTE: For best speed and reliability, we recommend using cable whenever possible.
14 UFED System
Chapter 4 –Extract Phone Data
6. Target Selection
Select USB (or SD) as the target location where the content will be copied to.
NOTE: If you extract to PC, the content goes directly into the UFED Report
Manager software. If you extract to USB or SD, the content is stored in a separate directory on the storage device.
Use the
▲▼ keys to move between options. Press OK or
►
to continue.
7. Content Types
Select content types to be extracted .
The UFED displays the options according to the capabilities available in the phone. (ex. If the phone does not support video, the “Videos” option will not appear).
Use the
▲▼
keys to move between options. Press OK to select an option.
Pressing on F2 will select/deselect all options. Press
►
to continue.
8. Transfer Instructions: Connection
The UFED now displays the connectivity instructions.
• If connecting via cable, the cable
User Manual 15
Chapter 4 –Extract Phone Data number is displayed.
• If connecting via Bluetooth, refer to
Chapter 6 for details.
• If connecting via IrDA (Infrared), place the phone with its infrared port directly in front of the UFED’s source or target infrared port.
Make sure that the phone is powered on, and the data connector is clean.
NOTE: When connected to the UFED, some phones will prompt you to choose an operating mode, such as “PC Suite” or “Phone Mode”.
Press
►
to start extraction.
9. Connect Target Device
If you have not yet plugged the USB drive or SD card into the UFED, do it now. The UFED is ready to copy the data to the storage device.
Press
►
to continue.
WARNING: Do not disconnect the phone or the power adaptor during the process! Once started, the process should not be interrupted.
16 UFED System
Chapter 4 –Extract Phone Data
10. Smartphone / PDA Installation
If the phone is a Smart Phone or PDA, you may need to install a client application on the phone.
Press
►
to continue.
11. Completion
Upon the completion of the process the
UFED- displays a message.
The message on the screen includes the phone’s ESN (for CDMA) OR IMEI
(for GSM).
NOTE: Besides the standard user phone data, the UFED also provides metadata about he phone. Among this data is the ESN (for
CDMA phones) or IMEI (for GSM phones). The ESN or IMEA is a unique identifier or serial number uniquely associated with each single handset device.
At this stage, the data is stored on the USB drive. This backup directory can be opened in the UFED Report Manager PC software to analyze data and generate reports. The data is also stored in
HTML format, and can be opened on any PC .
The transfer process is complete and you may now disconnect the phone and the PC from the UFED device.
User Manual 17
Chapter 4 –Extract Phone Data
4.4. Extract Phone Data to a PC
The UFED system includes UFED Report Manager software, which you can use to upload the extracted phone data from the UFED to your PC.
1. Main Menu and Phone Definitions
Select Extract Phone Data from the main menu, and then select the phone vendor, model, memory location and link method.
This part of the process is identical to the USB Extraction process. (see
Section 4.3).
Use the
▲▼
keys to move between options. Press OK or
►
to continue.
2. Target Selection
Select PC from the target menu.
Use the
▲▼ keys to move between options. Press OK or
►
to continue .
18
3. Content Types
Select content types to be extracted.
The UFED displays the options according to the capabilities available in the source phone. (ex. If the phone does not support video, the “Videos” option will not appear).
Use the
▲▼
keys to move between options. Press OK to select an option.
UFED System
Chapter 4 –Extract Phone Data
Press
►
to continue.
NOTE: Transfer time varies according to the data types selected.
Selecting all options will increase the transfer time.
4. Transfer Instructions: Connection
Make sure that the UFED is connected to the PC using the mini-USB cable.
The UFED displays the cable number to be used to connect the phone.
NOTE: When connected to the UFED, some phones will prompt you to choose an operating mode, such as “PC Suite” or “Phone Mode”.
Press
►
to continue.
The UFED now extracts the selected data to its internal memory, the following message will appear at the end of the extraction:
5. Run the UFED Report Manager
Run the UFED Report Manager software on your PC by choosing
Start/Programs/Cellebrite Mobile
Synchronization/UFED Report
Manager.
User Manual 19
Chapter 4 –Extract Phone Data
6. Read Data from Phone
Click the Read phone icon.
• If connecting the phone via cable, the UFED informs you which cable number to use. Find the cables in the cable organizer, according to the numbers indicated on the cable.
• If connecting via Bluetooth, refer to Chapter 6 for details.
• If connecting via IrDA (Infrared), place the phone with its infrared port directly in front of the UFED’s source or target infrared port.
5. Smartphone / PDA Installation
If the extracted phone is a Smart Phone or PDA, you may need to install a client application on the phone. (See Chapter
7)
Press
►
to continue.
6. Transfer
The UFED now sends the extracted data from its internal memory to the PC.
Transfer process is complete and you may now disconnect the phone and the
PC from the UFED device.
20 UFED System