Chapter 11. Upgrade
11.1. Overview
Cellebrite continuously updates its UFED software, providing support for new phone devices as they are released by the various phone vendors.
The Upgrade process installs these various updates on your UFED device.
The UFED application is constructed of three main files:
1. Tiny Image – Core system software
2. Full Image – Additional core system software
3. Application – The UFED application and data, including support for the various phone models.
When upgrading, you choose either Application Upgrade or Images
Upgrade. The Images Upgrade option updates both the Full and Tiny images.
You can upgrade your UFED in one of three ways:
1. Locally via USB Disk Drive or via SD card
2. Locally via PC
3. Remotely via the Internet
Automatic upgrade can be done when the UFED is connected to the internet, via the Ethernet connection.
NOTE: When performing an upgrade, the UFED will reset itself. Do not interrupt the process at any stage. The full upgrade process takes approximately four minutes.
User Manual 43
Upgrade
11.2. Upgrade from USB Disk Drive or SD Card
1. Main Menu
Select Services.
Press OK or
►
to continue.
2. Services Menu
Select Upgrade.
Press OK or
►
to continue.
3. Upgrade Menu
For a manual upgrade, you have two options:
• Upgrade Application Now – The
‘application’ refers to the UFED application data, which includes the support information for any new phones.
• Upgrade Image Now – The
‘image’ refers to the core software that is running on the UFED.
Use the
▲▼
keys to move between options. Press OK or
►
to continue.
44 UFED System
Chapter 11 - Upgrade
4. Select Upgrade Source
Choose USB Disk Drive or SD Card, according to where you have copied the upgrade files.
Use the
▲▼
keys to move between options. Press OK or
►
to continue.
5. Upgrade
The UFED will display the available upgrade files. Select the correct file,
Press OK or
►
to continue The
UFED now performs the upgrade.
Do not interrupt the UFED until the full process is complete.
6. Finish
After finishing the upgrade process, the UFED displays a message indicating that it completed the update. It will then restart automatically, and return you to the main menu.
11.3. Upgrade from PC
In order to upgrade from PC, the Upgrade Utility is required on your
PC. If it is not already installed, run the installation located on the
CD in the UFED Kit.
User Manual 45
Upgrade
When upgrading from a PC, the process is similar to that described above for USB Disk Drive, with a few additional steps on your PC, as described below.
1. Select Update Type and Source
On the UFED, after choosing
Services / Upgrade, choose the type of upgrade (Application or Image) and select PC as the source for the upgrade.
Use the
▲▼
keys to move between options. Press OK or
►
to continue.
2. Run the Upgrade Program on the PC
Run the Upgrade Program, via
“Start / Programs / Cellebrite /
Upgrade Program.”
7. Select Upgrade Type
On your PC, select the upgrade type, according to the type that you chose in step 1
8. Connect the UFED to the PC
Connect your UFED to the PC using the mini-USB cable provided in the kit. The cable connects to any standard USB port on the PC.
46 UFED System
Chapter 11 - Upgrade
9. Start the upgrade process
Start the upgrade process by performing the steps that are requested by the software’s dialog box displayed on your PC.
10. Upgrade
The UFED now performs the upgrade. Do not interrupt the UFED until the full process is complete.
11. Finish
After finishing the upgrade process, the UFED displays a message indicating that it completed the update. It will then restart automatically, and return to the main menu.
11.4. Upgrade from Web
User Manual 47
Upgrade
1. Configure HTTP Settings (one time only)
To upgrade from the web, first make sure that the FTP/HTTP settings are initialized properly. For most network environments, the UFED comes preconfigured properly. In some cases where network environments require proxies and userid/passwords, set these settings
as described in Section 11.5
2. Connect the UFED to the network
Connect the UFED device to your network via the Ethernet port on the top of the UFED. Use a standard
Ethernet cable for this connection.
3. Select Update Type and Source
On the UFED, after choosing
Services / Upgrade, choose the type of upgrade (Application or Image) and select HTTP Server as the source for the upgrade.
Use the
▲▼ keys to move between options. Press OK or
►
to continue.
48 UFED System
Chapter 11 - Upgrade
4. Upgrade
The UFED now performs the upgrade, by fetching the upgrade files from the HTTP server. Do not interrupt the UFED until the full process is complete.
5. Finish
After finishing the upgrade process, the UFED displays a message indicating that it completed the update. It will then restart automatically, and return to the main menu.
11.5. Automatic Upgrade from Web
If your UFED is connected to the network via the Ethernet port, you can configure it to perform automatic upgrades. This enables you to keep your
UFED up-to-date without requiring any ongoing interaction.
We recommend using this method, as it eliminates the manual process for each upgrade, and guarantees that your UFED remains up to date.
To do this, first select Upgrade Settings from the Upgrade menu. Then, set the following settings according to your preferences and your network requirements, as described in the following section.
User Manual 49
Upgrade
Auto Upgrade:
Method
Auto Upgrade:
Period
FTP Settings
FTP Proxy
Settings
• Disabled – The UFED will not perform any automated upgrades
• FTP – The UFED will access an FTP site in order to get upgrade files
• HTTP – The UFED will use HTTP to access upgrade files
Choose how often you want the UFED to check for upgrades – Daily, Weekly or Monthly.
If you chose FTP for your upgrade method, specify the ftp details, as provided by your distributor. You will need to specify:
• FTP Address
• Port Number
• Username
• Password
Hit F3 after each screen in order to continue.
• Direct Connect – Choose this if your network security does not require a proxy to access external FTP sites.
• Use Proxy – If a proxy is needed, choose this option. You will then be asked to provide the address and port of the proxy
50 UFED System
Chapter 11 - Upgrade
HTTP Settings
HTTP Proxy
Settings
Similar to the FTP settings, when the upgrade method is HTTP
Similar to FTP Proxy settings, when the upgrade method is HTTP.
• App – The application version
• Full and Tiny – The software image versions
• S/N – The UFED Serial Number
• ID – The unique identifier
User Manual 51