advertisement
▼
Scroll to page 2
of 64
8.1 Navigation Subtree of Tools
8
Tools
8.2 Firmware Upload
On the Tools Firmware Upload, you can upload a firmware to upgrade the DWG2000-1G. But you need to restart the DWG2000-1G device for the change to take effect.
8.3 Provision
On the Tools Provision interface, you can carry out some configurations to make the DWG2000-1G automatically upgrade with the latest firmware stored on a http server, ftp server or a ftp server.
The following is an example where ftp server is taken as an example to show how to do the configurations.
DWG2000-1G User Manual
41
Copyright @ 2011-2015 Dinstar
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 7 1 Product Description
- 7 1.1 Overview
- 7 1.2 Application Scenario
- 8 1.3 Product Appearance
- 8 1.3.1 Images of DWG2000-1G
- 9 1.3.2 Indicators and Related Explanation
- 9 1.4 Functions and Features
- 9 1.4.1 Protocols Supported
- 9 1.4.2 System Function
- 10 1.4.3 Industrial Standards Supported
- 10 1.4.4 General Hardware Specifications
- 11 2 Quick Installation
- 11 2.1 Prerequisites
- 11 2.2 Installation Procedures
- 12 3 Web Management System
- 12 3.1 Introduction to Web Management System
- 12 3.1.1 Parts of Web Management Interface
- 12 3.1.2 Login GUI of Web Management Interface
- 13 4 Network Configuration
- 13 4.1 Working Mode of Network
- 13 4.2 Network Configuration under Route Mode
- 14 4.2.1 Network Connection Diagram
- 15 4.2.2 Configuration Procedures on Web Management System
- 17 4.3 Network Configuration under Bridge Mode
- 17 4.3.1 Network Connection Diagram
- 17 4.3.2 Configuration Procedures on Web Management System
- 19 5 Mobile Configuration
- 19 5.1 SMS API
- 19 5.1.1 Introduction to SMS API
- 19 5.1.2 Configuration Procedures for SMS API
- 22 5.2 Send SMS & Receive SMS
- 22 5.2.1 Configuration Procedures for Sending SMS
- 23 5.2.2 Configuration Procedures for Receiving SMS
- 24 5.3 USSD
- 24 5.3.1 Configuration Procedures for USSD
- 25 5.4 GSM Audio Coding
- 25 5.4.1 Introduction to GSM Audio Coding
- 26 5.4.2 Configuration Procedures for GSM Audio Coding
- 27 5.5 Abnormal Call Handle
- 27 5.5.1 Configuration Procedures for Abnormal Call Handle
- 29 5.6 Enable Call Duration Limitation of Single Call & Enable Call Duration Limitation
- 29 5.6.1 Configuration Procedures for Enable Call Duration Limitation of Single Call
- 30 5.6.2 Configuration Procedures for Enable Call Duration Limitation
- 32 5.7 CLIR & Detect Reverse Polarity
- 32 5.7.1 Configuration procedures for CLIR & Detect Reverse Polarity
- 32 5.8 BCCH
- 33 5.8.1 Configuration Procedures for BCCH
- 34 5.9 Carrier
- 35 5.10 Call Forwarding
- 35 5.11 Call Waiting
- 36 6 Call Control
- 36 6.1 Navigation Subtree of Call Control
- 36 6.2 IP Tel Calls and Tel IP Calls
- 36 6.3 Configuration of IP Trunk and IP Trunk Group
- 36 6.3.1 Configuration of IP Trunk
- 37 6.3.2 Configuration of IP Trunk Group
- 38 6.4 Routing Configuration
- 39 6.5 Operation
- 39 6.5.1 Configuration Procedures for IP -> Tel Operation
- 41 6.5.2 Configuration Procedures for Tel -> IP Operation
- 42 6.6 Number Manipulation
- 42 6.6.1 Configuration Procedures for Manipulating IP –> Tel Destination Numbers
- 44 7 Statistics
- 44 7.1 Navigation Subtree for Statistics
- 44 7.2 TCP/UDP
- 44 7.3 RTP
- 45 7.4 SIP Call History
- 45 7.5 IP to GSM Call History
- 45 7.6 CDR Report
- 46 7.7 Lock BCCH Report
- 46 7.8 Current Call Status
- 47 8 Tools
- 47 8.1 Navigation Subtree of Tools
- 47 8.2 Firmware Upload
- 47 8.3 Provision
- 48 8.3.1 Configuration on FTP Server
- 49 8.3.2 Configuration on DWG2000-1G
- 50 8.4 Filelog Download
- 50 8.5 Management Parameter
- 51 8.6 Config Backup & Config Restore
- 51 8.6.1 Config Backup
- 51 8.6.2 Config Restore
- 51 8.7 IVR Voice Prompt Upload
- 51 8.8 Network Diagnosis
- 51 8.8.1 Ping Test
- 52 8.8.2 Tracert Test
- 52 8.8.3 Network Capture
- 52 8.9 Username & Password
- 53 8.10 Factory Reset
- 53 8.11 Auto Restart and Manually Restart
- 54 9 How to Connect with SIP Server
- 54 9.1 Configuration for connecting DWG2000-1G with Elastix through IP Trunking
- 54 9.1.1 Configuration procedures on Elastix Sever
- 56 9.1.2 Configuration procedures on DWG2000-1G
- 59 Trunking
- 59 9.2.1 Configuration on Elastix Sever
- 62 9.2.2 Configuration Procedures on DWG2000-1G