4.2. Basic functions. Kieback&Peter DDC4000

The DDC4000 is a decentralized control system that provides a plant with new options. It features Ethernet communication between the DDC4000 Central Units and BMS, a flexible and user-friendly touchscreen interface, BACnet native communication, structured parameterizing, and remote control via any Windows PC without additional software.

PDF

Document

Key features

Ethernet communication
Flexible user interface
BACnet native
Structured parameterizing
Remote control via any Windows PC
Checked controls
2 CAN buses
Switch modules
Separate customer and service interface
Integration in the planning tool

Frequently asked questions

The DDC4000 Central Units and bus modules are extensions to the Kieback&Peter product range providing a plant with new options.

The DDC4000 communicates via the standardized protocol BACnet.

To operate and project a DDC4000 central unit you only need a network connection and Internet explorer. No plug-in or additional programs are required.

The field bus can be used for distances up to 2000 meters.

BMA4024, BMD4032, BMD4064, SBM51_04, and FBM

User questions

Patricia Y.

How to reset the central unit to resolve persistent errors?

The device features a dedicated reset button located in the switches and buttons section. To address deeper system issues, a cold start or warm start procedure can be performed.

Patricia G.

Do cold start, warm start, or reset actions erase existing configurations?

No, performing a cold start, warm start, or reset does not erase the existing configuration. Configuration data is preserved outside of these startup processes, typically on a CompactFlash card.