Start. KIP KIP Network Printer, KIP Touchscreen

KIP Touchscreen

Clear

To reset the percentage value to default, press the “erase” button.

Start

The copier is always set to “Auto Start”. That is when an original is inserted into the

KIP 3000, it will start without user intervention.

The start button is used when a job is recalled. The start button will “start” the job if depressed after ‘Recall” (the name will change to “Re-print”).

View Last

The last documented scanned to be copied be viewed.

Recall Job

No function in Color Copy Mode.

Stop / Reset

This button has two functions.

1. Press the Stop button to stop the current scan. The original will be ejected automatically. If not, open Top Cover to remove the original.

2. Press the Reset button to restore the “default settings” in Copy Mode. Some of the default settings are determined in the Information / Help Screen of the

UI. (see Copy Mode Configurations chapter)

No part of this publication may be copied, reproduced or distributed in any form without express written permission from KIP.  2014 KIP.

- 103 -