KIP Touchscreen
Scanner
The Scanner button displays the scanner that is currently connected to the KIP Printer and the current status of the scanner. A green light shows the scanner is connected and working properly.
If a scanner is not detected select the button to search for a scanner.
Scan Preview
Scan Preview allows the user to see the file prior to sending it to the printer.
When Scan preview is selected the original will be scanned and then a preview will be displayed.
Selecting OK will return to the main copy screen.
Users also have the ability to copy a specific Area
Of Interest (AOI). There are two methods for selecting the AOI.
No part of this publication may be copied, reproduced or distributed in any form without express written permission from KIP. 2014 KIP.
- 147 -
KIP Touchscreen
The first method for setting the Area of interest is to touch the screen and hold and then drag a box around the specific area.
This will highlight only the selected area and if Ok is selected at this point, will only scan this area.
Clicking Reset AOI will return to the full screen view of the file.
The second method for setting the Area of interest is to touch the screen and hold for a second or two. A menu will appear, from this window a specific paper size can be selected as the Area of interest.
This will highlight the specific size selected, and if Ok is clicked at this point, only this area will be scanned
Note: In both methods once the size is selected the user has the ability to drag the box around on the screen to set the position.
No part of this publication may be copied, reproduced or distributed in any form without express written permission from KIP. 2014 KIP.
- 148 -
