KIP Touchscreen
7100 Stacking
For use with the 7100 only. This allows the user to decide how the prints will come out of the
LIP 7100 Printer. There are three (3) methods for printing:
Front Only – All prints will stack on the front (top) of the printer
Back Only – All prints will stack out the back of the printer (optional stacker needed).
Front & Back (default Front) – Prints can be printed to the front or back (optional stacker needed) Front will be default.
Front & Back (default Back) - Prints can be printed to the front or back (optional stacker needed) Back will be default.
Media QC Print
Automatic Initial Cut known as “Dummy Print” is now added to the User Mode in Setting Mode 2 of the printer.
This is not a feature set within the KIP. The service technician can set this mode after unlocking the key operation of the Sub UI (LCD Display/ OP Panel). Under a certain usage environment, the first print of a job sometimes would have a wrinkle or an image void if the prints are made with a roll media left in the deck for a long period. “Dummy Print” makes an automatic 24” initial cut before processing a job to obtain optimum image quality and feed balance in such conditions.
Master Lead / Trail Adjustment
The leading and trailing edges on scans and copies can be adjusted to best suit user requirements. This adjustment adds or removes image / media from all scans and copies and should be considered a default setting of such.
No part of this publication may be copied, reproduced or distributed in any form without express written permission from KIP. 2014 KIP.
- 185 -
