LH040 ECO SERIES Instruction Manual

12 Playback

12.1.3

Controlling the Time Range of the Playback Bar

The time range is the start and end times of the footage displayed in the Playback Bar. By default, the Playback Bar displays recordings recorded on the day selected for playback

(from 00:00~24:00). You can change the time range to narrow in on a specific time.

To control the time range of the Playback Bar:

1. During Playback mode, click to open the time range controls.

2. Click 30m, 1H, 2H, or 24H to select a time range. For example, if 30m is selected, the playback bar will show 15 minutes before to 15 minutes after the currently playing time.

OR

To create a custom time range:

2.1.

Click . The button will become colored.

2.2.

Move your mouse to the time you where you would like the range to start and click. Then, move your mouse to the time you where you would like the range to end and click. The start and end times will be replaced by the 1st and 2nd times that you clicked on.

12.1.4

Using Zoom in Playback Mode

You can use Zoom in Playback Mode. This is useful if you need a closer look at recorded video.

Note

Zoom is only available when a single channel is selected for playback.

To use zoom in Playback Mode:

1. Open Playback Mode with only one channel selected. For details, see 12.1 Playing

Back Recorded Video, page 26.

#LX400015; r. 1.0/13705/13705; en-US

29