LH040 ECO SERIES Instruction Manual

15 Using the Main Menu

15.6

Device

The Device menu allows you to configure and format hard drives, configure PTZ cameras

(not included), and format a USB flash drive (not included).

• For details on connecting PTZ cameras (not included), see 21 Connecting a PTZ Cam-

era, page 132.

15.6.1

Formatting the Hard Drive

CAUTION

Formatting the HDD erases all data on the hard disk. This step cannot be undone.

1. Select the HDD tab.

2. Click the checkbox under Select to choose the drive you wish to reformat.

3. Click Format HDD.

4. When the warning window appears, click OK. Wait for the system to format the hard drive.

15.6.2

Configuring Overwrite

If Overwrite recording is enabled, the system’s hard drive automatically re-writes the hard drive’s oldest content (first in first out). Otherwise, the system will stop recording when the hard drive is full.

To configure Overwrite:

1. Select the HDD tab.

2. Select the checkbox beside the hard drive you wish to configure.

#LX400015; r. 1.0/13705/13705; en-US

59