advertisement
26
Operating Instructions
Washing Programme Progress
Programme progress display
Prior to the start, the programme steps chosen are displayed by the Programme progress display.
During the washing programme the current programme step is displayed.
Multi display
The expected time remaining (in minutes) up to the end of the programme is shown in the Multi display.
3
The multi display indicates the estimated duration, in minutes, of the programme. These timings are estimates and can vary according to incoming water temperature, type and quantity of laundry, out of balance spin detection and foam detection. During the programme countdown, the remaining time can be recalculated due to any of the above factors.
Changing spin speed
During the washing programme, the spin speed can still be changed or
RINSE HOLD can be set.
Other settings cannot be changed.
0
Stopping the programme
Turn the progamme selector to OFF in order to stop the washing prematurely.
3
The programme can be interrupted at any time with the START/PAUSE button and can be continued again by pressing this button again.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 10 Control Panel
- 10 Programme Selector
- 12 Programme Option Buttons
- 13 Programmable functions
- 14 Consumption Values and Programme Times
- 14 Wash Time Display
- 15 What does “UPDATE” mean?
- 15 Anti-flood system Aqua Control + Aqua Alarm
- 16 Before the First Wash
- 16 Preparing a Wash Load
- 16 Sorting and preparing a wash load
- 17 Washing Types and Care Symbols
- 18 Washing Detergents and Care Agents
- 18 Which washing detergent and care agent?
- 18 How much washing detergent and care agent?
- 18 Water softener
- 19 Running a Wash Cycle
- 19 Brief Instructions
- 20 Setting the wash programme
- 21 Changing Spin Speed /selecting RINSE HOLD
- 22 Setting the delay timer/soaking duration
- 23 Opening and closing the door
- 23 Loading the Washing
- 24 Add detergent/conditioner
- 25 Starting the wash programme
- 26 Washing Programme Progress
- 27 Washing cycle complete/Removing the washing
- 28 Programme Tables
- 28 Washing
- 29 Separate Rinse/Conditioning/Starching/Treating
- 29 Separate Spinning
- 30 Cleaning and Care
- 30 Control panel
- 30 Detergent Drawer
- 31 Washing Drum
- 31 Main door
- 32 What to do if...
- 32 Remedying faults
- 36 If the washing results are not satisfactory
- 37 Carrying out emergency drainage
- 38 Drain pump
- 39 Emergency unlocking of the door
- 40 Additional Rinse RINSE
- 41 Water Cooling
- 41 Additional Rinse and Water Cooling
- 42 Variomatic Loose Spin
- 43 Programme Protection
- 44 Child Safety Feature
- 45 Installation Safety Precautions
- 46 Installation of the appliance
- 46 Transporting the appliance
- 46 Remove transport packaging
- 48 Prepare the installation place
- 48 Installation on a concrete base
- 48 Installation on vibrating floors
- 49 Compensate for floor unevenness
- 50 Electrical connection
- 50 Water connection
- 50 Permissible water pressure
- 51 Water inflow
- 52 Water drain
- 52 Delivery heads over 1m
- 53 Technical data
- 53 Dimensions