advertisement
Operating Instructions
Programme Protection
To safeguard a programme setting against unwanted changes (e. g. program selector turned, option buttons pressed etc.), you can set the programme protection. This prevents your washing being damaged.
3
It is possible to set or cancel the programme protection at any time during a programme.
Selecting programme protection:
0 1. Select the desired wash programme settings.
2. Press the START/PAUSE button to start the programme.
3. Press and hold down the PRE WASH and SENSITIVE buttons simultaneously for 5 seconds. The programme progress indicator will flash for
5 seconds; programme protection has been set.
3
As long as the programme protection is set, you cannot make any other settings. The door cannot be opened using the DOOR/LIGHT button.
Even after the wash cycle has finished you will need to cancel the programme protection before you can open the door.
If an attempt is made to change the selected settings during the wash cycle by activating a button, the programme progress display will flash for 5 seconds.
If you attempt to change the selected setting by turning the programme selector, the programme progress display will flash until the original setting of the programme selector is restored. The wash cycle is not influenced in either case.
3
The programme selector must be in its original position in order to cancel the programme protection.
0
Cancelling programme protection:
Press and hold down the PRE WASH and SENSITIVE buttons simultaneously for 5 seconds. The programme progress indicator flashes for
5 seconds and then remains illuminated constantly for 5 seconds. Programme protection has been cancelled.
43
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 10 Control Panel
- 10 Programme Selector
- 12 Programme Option Buttons
- 13 Programmable functions
- 14 Consumption Values and Programme Times
- 14 Wash Time Display
- 15 What does “UPDATE” mean?
- 15 Anti-flood system Aqua Control + Aqua Alarm
- 16 Before the First Wash
- 16 Preparing a Wash Load
- 16 Sorting and preparing a wash load
- 17 Washing Types and Care Symbols
- 18 Washing Detergents and Care Agents
- 18 Which washing detergent and care agent?
- 18 How much washing detergent and care agent?
- 18 Water softener
- 19 Running a Wash Cycle
- 19 Brief Instructions
- 20 Setting the wash programme
- 21 Changing Spin Speed /selecting RINSE HOLD
- 22 Setting the delay timer/soaking duration
- 23 Opening and closing the door
- 23 Loading the Washing
- 24 Add detergent/conditioner
- 25 Starting the wash programme
- 26 Washing Programme Progress
- 27 Washing cycle complete/Removing the washing
- 28 Programme Tables
- 28 Washing
- 29 Separate Rinse/Conditioning/Starching/Treating
- 29 Separate Spinning
- 30 Cleaning and Care
- 30 Control panel
- 30 Detergent Drawer
- 31 Washing Drum
- 31 Main door
- 32 What to do if...
- 32 Remedying faults
- 36 If the washing results are not satisfactory
- 37 Carrying out emergency drainage
- 38 Drain pump
- 39 Emergency unlocking of the door
- 40 Additional Rinse RINSE
- 41 Water Cooling
- 41 Additional Rinse and Water Cooling
- 42 Variomatic Loose Spin
- 43 Programme Protection
- 44 Child Safety Feature
- 45 Installation Safety Precautions
- 46 Installation of the appliance
- 46 Transporting the appliance
- 46 Remove transport packaging
- 48 Prepare the installation place
- 48 Installation on a concrete base
- 48 Installation on vibrating floors
- 49 Compensate for floor unevenness
- 50 Electrical connection
- 50 Water connection
- 50 Permissible water pressure
- 51 Water inflow
- 52 Water drain
- 52 Delivery heads over 1m
- 53 Technical data
- 53 Dimensions