Lavamat 86760 User Manual

40

Operating Instructions

Additional Rinse RINSE+

The washing machine is set for very economical water consumption.

However, for persons who suffer from allergies to detergents, it can be helpful to rinse with extra water.

3

If this function is set, an additional rinse cycle is carried out for the

COTTONS/LINEN, EASY-CARES, EASY IRON and DELICATES programmes.

When the appliance is supplied from the factory, the additional rinse function is not set.

Setting the additional rinse function:

0

1. Turn the programme selector to SHORT SPIN.

2. Press the SENSITIVE button for at least 5 seconds. After the button has been pressed for 5 seconds, RINSE

+

will flash in the programme progress display for 5 seconds.

3. While RINSE

+

is flashing, release the SENSITIVE button. Once the flashing has stopped, the additional rinse has been set. It will remain set until it is cancelled again. When the additional rinse has been set, the

RINSE

+

indicator in the programme progress display is illuminated before the programme starts and during the additional rinse.

4. If you wish to check whether the additional rinse is set:

– Turn the programme selector to SHORT SPIN.

– Press the SENSITIVE button briefly.

If RINSE

+

flashes in the programme progress display the additional rinse has been set.

Cancelling the additional rinse:

0 1. Turn the programme selector to SHORT SPIN.

2. Press the SENSITIVE button for at least 5 seconds.

Immediately the button is pressed RINSE

+

will flash in the programme progress display. After 5 seconds RINSE

+

will stop flashing and remain constantly illuminated for a further 5 seconds.

3. While RINSE

+

is constantly illuminated, release the SENSITIVE button.

Once RINSE

+

is no longer illuminated the additional rinse has been cancelled.

3

An additional rinse cycle increases water consumption and the programme duration.