- No category
advertisement
MI 2792A PowerQ4 Plus
Operating the instrument
If “Trigger source” is selected, change Trigger source.
If SIGNALS dialog box is open, scroll through all channels.
If “Store buffer” is selected, change Store buffer size.
If “Pre – trigger length” is selected, change pre – trigger buffer size.
Open SIGNALS dialog box (if “Signals” is selected). In this dialog box the individual signals can be selected for recording.
Return to the “RECORDERS” menu screen or close the SIGNALS dialog box (if the dialog box is open).
3.10.2 Capturing waveform
Following screen opens when a user starts the waveform recorder.
Figure 3.34: Waveform recorder capture screen.
Table 3.42: Instrument screen symbols and abbreviations
f
Up p: [1..3, N]
Upg p,g: [1, 2, 3]
Ip p: [1..3, N]
Thd
Current instrument status:
Instrument
Instrument is recording (beep indicates that trigger limit has been reached.
Instrument is busy (saving data to memory).
Current instrument time
True effective value of phase voltage:
U
1Rms
, U
2Rms
, U
3Rms
, U
NRms
True effective value of phase-to-phase (line) voltage:
U
12Rms
, U
23Rms
, U
31Rms
True effective value of current:
I
1Rms
, I
2Rms
, I
3Rms
, I
NRms
Total harmonic distortion for displayed quantity (THD
U
or THD
I
)
Frequency on reference channel
Table 3.43: Keys functions
Manually generate trigger condition (Active only if Manual trigger is selected and recording is in progress).
Select which waveforms to show:
Show voltage waveform;
Show current waveform ;
47
advertisement
Related manuals
advertisement
Table of contents
- 6 Introduction
- 6 Main Features
- 7 Safety considerations
- 8 Applicable standards
- 8 Abbreviations
- 12 Description
- 12 Front panel
- 13 Connector panel
- 14 Bottom view
- 14 Accessories
- 14 Standard accessories
- 15 Optional accessories
- 16 Operating the instrument
- 17 Instrument Main Menu
- 18 Instrument main functions
- 19 U, I, f menu
- 19 Meter
- 20 Scope
- 22 Trend
- 25 Power menu
- 25 Meter
- 26 Trend
- 28 Energy menu
- 29 Harmonics / interharmonics menu
- 29 Meter
- 31 Histogram (Bar)
- 32 Trend
- 35 Flickermeter
- 35 Meter
- 36 Trend
- 37 Phase Diagram
- 37 Phase diagram
- 38 Symmetry diagram
- 39 Symmetry trend
- 41 Temperature
- 41 Meter
- 41 Trend
- 42 General Recorder
- 45 Waveform recorder
- 45 Setup
- 47 Capturing waveform
- 48 Captured waveform
- 51 Inrush / Fast recorder
- 52 Setup
- 53 Capturing inrush
- 54 Captured inrush
- 56 Transients recorder
- 56 Setup
- 57 Capturing transients
- 58 Captured transients
- 61 Events table
- 65 Alarms table
- 66 Memory List
- 68 Record
- 70 Waveform snapshoot
- 71 Waveform record
- 71 Inrush/Fast logger
- 71 Transients record
- 71 Measurement Setup menu
- 72 Connection setup
- 74 Event setup
- 74 Alarm setup
- 76 Signalling setup
- 76 General Setup menu
- 77 Communication
- 79 Time & Date
- 79 Language
- 80 Clear Memory
- 81 Instrument info
- 81 Lock/Unlock
- 83 Recording Practice and Instrument Connection
- 83 Measurement campaign
- 87 Connection setup
- 87 Connection to the LV Power Systems
- 91 Connection to the MV or HV Power System
- 92 Current clamp selection and transformation ratio setting
- 96 Temperature probe connection
- 97 GPS time synchronization device connection
- 98 GPRS modem connection
- 99 Number of measured parameters and connection type relationship
- 102 Theory and internal operation
- 102 Measurement methods
- 102 Measurement aggregation over time intervals
- 102 Voltage measurement (magnitude of supply voltage)
- 103 Current measurement (magnitude of supply current)
- 103 Frequency measurement
- 104 Phase power measurements
- 104 Total power measurements
- 105 Energy
- 106 Harmonics and interharmonics
- 107 Signallling
- 108 Flicker
- 109 Voltage and current unbalance
- 110 Voltage events
- 112 Alarms
- 113 Data aggregation in GENERAL RECORDING
- 117 Waveform snapshoot
- 117 Waveform record
- 118 Transient recorder
- 118 Inrush/Fast recorder