- No category
advertisement
MI 2792A PowerQ4 Plus
Operating the instrument
3.15.3 Waveform record
This type of record is made by Waveform recorder. For details regarding manipulation
and data observing see section Captured waveform 3.10.3
3.15.4 Inrush/Fast logger
This type of record is made by Inrush logger. For details regarding manipulation and
data observing see section 3.11.3.
3.15.5 Transients record
This type of record is made by Transient recorder. For details regarding manipulation
and data observing see section 3.12.3.
3.16 Measurement Setup menu
From the “MEASUREMENT SETUP” menu measurement parameters can be reviewed, configured and saved.
Figure 3.53: MEASUREMENT SETUP menu
Table 3.76: Description of setup options
Connection setup
Event setup
Alarm setup
Signalling setup
Setup measurement parameters.
Setup event parameters.
Setup alarm parameters.
Setup signalling parameters
Table 3.77: Keys function
Select function from the “SETUP” menu.
Enter the selected item.
Back to the “MAIN MENU” screen.
71
advertisement
Related manuals
advertisement
Table of contents
- 6 Introduction
- 6 Main Features
- 7 Safety considerations
- 8 Applicable standards
- 8 Abbreviations
- 12 Description
- 12 Front panel
- 13 Connector panel
- 14 Bottom view
- 14 Accessories
- 14 Standard accessories
- 15 Optional accessories
- 16 Operating the instrument
- 17 Instrument Main Menu
- 18 Instrument main functions
- 19 U, I, f menu
- 19 Meter
- 20 Scope
- 22 Trend
- 25 Power menu
- 25 Meter
- 26 Trend
- 28 Energy menu
- 29 Harmonics / interharmonics menu
- 29 Meter
- 31 Histogram (Bar)
- 32 Trend
- 35 Flickermeter
- 35 Meter
- 36 Trend
- 37 Phase Diagram
- 37 Phase diagram
- 38 Symmetry diagram
- 39 Symmetry trend
- 41 Temperature
- 41 Meter
- 41 Trend
- 42 General Recorder
- 45 Waveform recorder
- 45 Setup
- 47 Capturing waveform
- 48 Captured waveform
- 51 Inrush / Fast recorder
- 52 Setup
- 53 Capturing inrush
- 54 Captured inrush
- 56 Transients recorder
- 56 Setup
- 57 Capturing transients
- 58 Captured transients
- 61 Events table
- 65 Alarms table
- 66 Memory List
- 68 Record
- 70 Waveform snapshoot
- 71 Waveform record
- 71 Inrush/Fast logger
- 71 Transients record
- 71 Measurement Setup menu
- 72 Connection setup
- 74 Event setup
- 74 Alarm setup
- 76 Signalling setup
- 76 General Setup menu
- 77 Communication
- 79 Time & Date
- 79 Language
- 80 Clear Memory
- 81 Instrument info
- 81 Lock/Unlock
- 83 Recording Practice and Instrument Connection
- 83 Measurement campaign
- 87 Connection setup
- 87 Connection to the LV Power Systems
- 91 Connection to the MV or HV Power System
- 92 Current clamp selection and transformation ratio setting
- 96 Temperature probe connection
- 97 GPS time synchronization device connection
- 98 GPRS modem connection
- 99 Number of measured parameters and connection type relationship
- 102 Theory and internal operation
- 102 Measurement methods
- 102 Measurement aggregation over time intervals
- 102 Voltage measurement (magnitude of supply voltage)
- 103 Current measurement (magnitude of supply current)
- 103 Frequency measurement
- 104 Phase power measurements
- 104 Total power measurements
- 105 Energy
- 106 Harmonics and interharmonics
- 107 Signallling
- 108 Flicker
- 109 Voltage and current unbalance
- 110 Voltage events
- 112 Alarms
- 113 Data aggregation in GENERAL RECORDING
- 117 Waveform snapshoot
- 117 Waveform record
- 118 Transient recorder
- 118 Inrush/Fast recorder