- Industrial & lab equipment
- Measuring, testing & control
- Multimeters
- Fluke
- 1654B06-TPOLEKIT/DVDE-tester
- User manual
1652C/1653B/1654B Users Manual. Fluke 1654B, 1652C, 1654B06-TPOLEKIT/DVDE-tester
Add to my manuals
66 Pages
advertisement
1652C/1653B/1654B
Electrical Installation Tester
Users Manual
September 2010
© 2010 Fluke Corporation. All rights reserved.
Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is three years and begins on the date of shipment. Parts, product repairs, and services are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of a Fluke authorized reseller, and does not apply to fuses, disposable batteries, or to any product which, in Fluke's opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation or handling. Fluke warrants that software will operate substantially in accordance with its functional specifications for 90 days and that it has been properly recorded on non-defective media. Fluke does not warrant that software will be error free or operate without interruption.
Fluke authorized resellers shall extend this warranty on new and unused products to enduser customers only but have no authority to extend a greater or different warranty on behalf of Fluke. Warranty support is available only if product is purchased through a Fluke authorized sales outlet or Buyer has paid the applicable international price. Fluke reserves the right to invoice Buyer for importation costs of repair/replacement parts when product purchased in one country is submitted for repair in another country.
Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair, or replacement of a defective product which is returned to a Fluke authorized service center within the warranty period.
To obtain warranty service, contact your nearest Fluke authorized service center to obtain return authorization information, then send the product to that service center, with a description of the difficulty, postage and insurance prepaid (FOB Destination). Fluke assumes no risk for damage in transit. Following warranty repair, the product will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that failure was caused by neglect, misuse, contamination, alteration, accident, or abnormal condition of operation or handling, including overvoltage failures caused by use outside the product’s specified rating, or normal wear and tear of mechanical components, Fluke will provide an estimate of repair costs and obtain authorization before commencing the work.
Following repair, the product will be returned to the Buyer transportation prepaid and the
Buyer will be billed for the repair and return transportation charges (FOB Shipping Point).
THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PAR-
TICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF
DATA, ARISING FROM ANY CAUSE OR THEORY.
Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of incidental or consequential damages, the limitations and exclusions of this warranty may not apply to every buyer. If any provision of this Warranty is held invalid or unenforceable by a court or other decision-maker of competent jurisdiction, such holding will not affect the validity or enforceability of any other provision.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
11/99
Table of Contents
Introduction ................................................................................ 1
How to Contact Fluke ................................................................. 1
Safety ......................................................................................... 2
Unpacking the Tester ................................................................. 4
Operating the Tester .................................................................. 6
Using the Rotary Switch ......................................................... 6
Understanding the Pushbuttons.............................................. 7
Understanding the Display...................................................... 9
Input Terminals ....................................................................... 15
Using the IR Port .................................................................... 15
Error Codes ............................................................................ 16
Power-On Options .................................................................. 17
Making Measurements ............................................................... 19
Measuring Volts and Frequency ............................................. 19
Measuring Insulation Resistance ............................................ 20
Measuring Continuity .............................................................. 21
Measuring Loop/Line Impedance............................................ 22
Loop Impedance (Line to Protective Earth L-PE) ................ 22
Earth Resistance Testing by Loop Method ......................... 25
Line Impedance................................................................... 26
Measuring RCD Tripping Time ............................................... 28
Measuring RCD Tripping Current ........................................... 32
RCD Testing in IT Systems .................................................... 34
Measuring Earth Resistance................................................... 34
Testing Phase Sequence........................................................ 36
Memory Mode ............................................................................ 37
Storing a Measurement .......................................................... 38
Recalling a Measurement ....................................................... 38
Clearing Memory .................................................................... 39
Uploading Test Results .............................................................. 40
Maintaining the Tester................................................................ 41
Cleaning ................................................................................. 41
Testing and Replacing the Batteries ....................................... 41
Testing the Fuse ..................................................................... 43
Specifications ............................................................................. 44
Features by Model .................................................................. 44
i
1652C/1653B/1654B
Users Manual
General Specifications ........................................................... 45
Category Ratings and Usage ................................................. 46
Electrical Measurement Specifications................................... 46
Insulation Resistance (R
ISO
)................................................ 46
Insulation Resistance (R
ISO
) (cont.) .................................... 47
Continuity (R
LO
)................................................................... 47
Loop Tests (Z
I
).................................................................... 48
RCD/FI Tests (
Δ
T, I
Δ
N)........................................................ 49
Earth Tests (R
E
).................................................................. 50
AC Voltage Measurement (V)............................................. 50
Continuity Testing (RLO) .................................................... 50
Insulation Resistance Measurement (RISO)....................... 51
Loop and Line Impedance (Z
I
) ............................................ 52
No Trip and Hi Current Modes RCD/FI ............................... 52
Prospective Earth Fault Current Test (PSC/I
K
RCD Testing........................................................................... 53
RCD Types Tested ............................................................. 53
Test Signals........................................................................ 53
Tripping Speed Test (
Δ
T).................................................... 54
Maximum Trip Time ............................................................ 54
RCD/FI-Tripping Current Measurement/Ramp Test (I
Δ
Earth Resistance Test (RE )................................................... 55
Phase Sequence Indication.................................................... 56
Mains Wiring Test................................................................... 56
Operating Ranges and Uncertainties per EN 61557 .............. 57
Operating Uncertainties per EN 61557................................... 58
ii
List of Tables
Accessories ................................................................ 4
Specific Mains Cords .................................................... 5
5. Pushbuttons ............................................................................... 7
6. Display
7. Error
8. Power-On
Features ........................................................................ 10
Codes ................................................................................ 16
Options...................................................................... 17
iii
1652C/1653B/1654B
Users Manual iv
List of Figures
2. Pushbuttons ............................................................................... 7
3. Models 1652C and 1653B Display Features .............................. 9
5. Input
6. Error
7. Lead
Display Features .................................................. 10
Terminals........................................................................... 15
Display .............................................................................. 16
Swapping Modes............................................................... 18
8.
Volts Display/Switch and Terminal Settings ............................... 19
Resistance Display/Switch and Terminal Settings ..... 20
10. Continuity and Continuity Zero Display/Switch and
Terminal Settings ....................................................................... 21
11. Loop/Line
12. Display
Impedance/Switch and Terminal Settings.................. 22
After Zeroing.................................................................. 24
13. 3-Wire Connection for Earth Resistance Loop Test ................... 25
Impedance Display ............................................................. 26
15. Measuring in a 3-Phase System................................................. 27
16. RCD Tripping Time Display/Switch and Terminal Settings......... 28
Current/Switch and Terminal Settings ................. 32
18. Connection for RCD Testing on IT Electrical Systems ............... 34
19. Earth Resistance Display/Switch and Terminal Settings ............ 34
Test Connection ............................................. 35
21. Phase Sequence Display/Switch and Terminal Settings ............ 36
23. Attaching
24. Replacing
Test Connection ............................................. 36
IR Adapter ............................................................ 40
the Batteries .............................................................. 42
v
1652C/1653B/1654B
Users Manual vi
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 1 1652C/1653B/1654B Users Manual
- 2 Warranty
- 3 Table of Contents
- 5 List of Tables
- 7 List of Figures
- 9 Introduction
- 9 How to Contact Fluke
- 10 Safety
- 12 Unpacking the Tester
- 14 Operating the Tester
- 14 Using the Rotary Switch
- 15 Understanding the Pushbuttons
- 17 Understanding the Display
- 23 Input Terminals
- 23 Using the IR Port
- 24 Error Codes
- 25 Power-On Options
- 27 Making Measurements
- 27 Measuring Volts and Frequency
- 28 Measuring Insulation Resistance
- 29 Measuring Continuity
- 30 Measuring Loop/Line Impedance
- 30 Loop Impedance (Line to Protective Earth L-PE)
- 33 Earth Resistance Testing by Loop Method
- 33 Line Impedance
- 36 Measuring RCD Tripping Time
- 40 Measuring RCD Tripping Current
- 42 RCD Testing in IT Systems
- 42 Measuring Earth Resistance
- 44 Testing Phase Sequence
- 45 Memory Mode
- 46 Storing a Measurement
- 46 Recalling a Measurement
- 47 Clearing Memory
- 48 Uploading Test Results
- 49 Maintaining the Tester
- 49 Cleaning
- 49 Testing and Replacing the Batteries
- 51 Testing the Fuse
- 52 Specifications
- 52 Features by Model
- 53 General Specifications
- 54 Category Ratings and Usage
- 54 Electrical Measurement Specifications
- 54 Insulation Resistance (RISO)
- 55 Continuity (RLO)
- 56 Loop Tests (ZI)
- 57 RCD/FI Tests ((T, I(N)
- 58 Earth Tests (RE)
- 58 AC Voltage Measurement (V)
- 58 Continuity Testing (RLO)
- 59 Insulation Resistance Measurement (RISO)
- 60 No Trip and Hi Current Modes RCD/FI
- 60 Prospective Earth Fault Current Test (PSC/IK)
- 61 RCD Testing
- 61 RCD Types Tested
- 61 Test Signals
- 62 Tripping Speed Test ((T)
- 62 Maximum Trip Time
- 63 RCD/FI-Tripping Current Measurement/Ramp Test (I(N )
- 63 Earth Resistance Test (RE )
- 64 Phase Sequence Indication
- 64 Mains Wiring Test
- 65 Operating Ranges and Uncertainties per EN 61557
- 66 Operating Uncertainties per EN 61557