Tools Needed. Bosch Dishwasher


Add to My manuals
50 Pages

advertisement

Tools Needed. Bosch Dishwasher | Manualzz

2

Tools and Materials Needed

TOOLS NEEDED

Hammer Hole Saw Pipe Wrench

Tape Measure Slot Screwdriver

Phillips Screwdriver

Adjustable Wrench

Torx Screwdriver

Wire Cutter

Wire Stripper Drill

Level

MATERIALS NEEDED

(Additional materials may be required to comply with local codes.)

Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1 ground, insulated copper conductors.

Hot Water Supply Line - Minimum 3/8” O.D. copper tubing or metal braided dishwasher supply line.

Shut-off valve and fittings appropriate for hot water supply line (copper tubing/compression fitting, or braided hose).

90° elbow with 3/8” N.P.T. male threads on one leg, and sized to fit your water supply line (copper tubing/compression fitting, or braided hose) on the other leg.

Teflon tape or other pipe thread compound to seal plumbing connections.

UL listed conduit connector or strain relief.

advertisement

Key Features

  • White Freestanding
  • 16 L 54 dB
  • AquaStop function

Related manuals

Frequently Answers and Questions

How do I install the dishwasher?
Please refer to the installation instructions provided with your dishwasher.
How do I use the Power Scrub Plus option?
To use the Power Scrub Plus option, simply press the "Power Scrub Plus" button on the control panel.
How do I delay the start of the cycle?
To delay the start of the cycle, press the "Delay Start" button on the control panel and select the desired delay time.

advertisement