Drain Hose Connection. Bosch Dishwasher

Figure 22

Figure 24

Drain Hose Connection

DRAIN HOSE CONNECTION

The dishwasher drain hose may be connected to the drain plumbing in one of four ways:

1) Directly to the undersink dishwasher drain connection, as shown in Figure 22.

2) Directly to a disposer dishwasher drain connection, as shown in Figure 23.

3) To the undersink dishwasher drain connection through an air gap, as shown in Figure 24.

4) To a disposer dishwasher drain connection through an air gap, as shown on Figure 25.

Figure 23

Figure 25

Information on installing air gaps and disposers can be found in the Plumbing Preparation section of this manual.

NOTE: If the dishwasher drain hose is to be connected to a disposer dishwasher drain connection, remove the plug from the disposer’s dishwasher drain connection.

Use the supplied Rubber Connection Hose and Drain Hose

Clamps (letter G in the Materials Supplied section of this manual) to connect the dishwasher drain hose to the plumbing drain connection. Use the spring clamp to secure the Rubber Connection Hose to the dishwasher drain hose.

Use the screw clamp to secure the Rubber Connection

Hose to the plumbing drain connection.

If the dishwasher drain hose is connected directly to either an undersink dishwasher drain connection, as shown in

Figure 22, or to a disposer dishwasher drain connection, as shown in Figure 23, form a curve in the dishwasher drain hose and secure a portion of the curve at least 20”

(508mm) above the cabinet floor.

11