- No category
advertisement
SYMBOLS
�
Caution! Refer to the explanation in this Manual
*
Laser light. Do not stare into laser beam
KY
Caution ! Non-contact voltage
M
Battery
Do not apply directly or around bare hazardous live conductor.
�
Conform to relevant Australian standards
�
Complies with European Directives
=
Do not dispose of this product as unsorted municipal waste. Contact a qualified recycler
�
Safety Information
�
Warning
• Do not stare into laser beam.
• Do not point laser directly at eye or indirectly off reflective surfaces.
• For use by competent persons only.
• Do not leave the unit on or near objects of high temperature.
• Non-Contact Voltage function can only test on insulated wires. Testing on high voltage wires should keep a distance of 20mm minimum.
• Do not use the unit to sense wire voltage higher than 600V.
1
Downloaded from www.Manualslib.com
manuals search engine
advertisement
Related manuals
advertisement
Table of contents
- 8 SYMBOLS
- 9 UNPACKING AND INSPECTION
- 9 INTRODUCTION
- 10 OPERATING INSTRUCTIONS
- 10 Power On / Off
- 10 Auto Power Off
- 10 Auto Hold
- 10 Operating the unit
- 11 Making Temperature Measurement
- 12 °C / °F Selection
- 12 Distance & Spot Size
- 13 Reminders
- 14 Emissivity
- 15 Non-Contact Voltage
- 16 SPECIFICATION
- 17 TROUBLE SHOOTING
- 17 MAINTENANCE AND REPAIR
- 18 BATTERY REPLACEMENT