- No category
advertisement
▼
Scroll to page 2
of
90
TROUBLESHOOTING
Code
Battery icon appears
Blank display
Laser doesn‘t work
Problem
Possible dead battery
Action
Possible low battery Check and/or replace battery
Check and/or replace battery
Low or dead battery
Replace battery
MAINTENANCE AND REPAIR
Lens Cleaning: Blow off loose particles using clean compressed air. Gently brush remaining debris away with a camel’s hair brush. Carefully wipe the surface with a moist cotton swab. The swab may be moistened with water or rubbing alcohol.
NOTE: DO NOT use solvents to clean the plastic lens.
Case Cleaning: Use soap and water on a damp sponge or soft cloth.
NOTE: DO NOT submerge the unit in water.
Downloaded from www.Manualslib.com
manuals search engine
10
advertisement
Related manuals
advertisement
Table of contents
- 8 SYMBOLS
- 9 UNPACKING AND INSPECTION
- 9 INTRODUCTION
- 10 OPERATING INSTRUCTIONS
- 10 Power On / Off
- 10 Auto Power Off
- 10 Auto Hold
- 10 Operating the unit
- 11 Making Temperature Measurement
- 12 °C / °F Selection
- 12 Distance & Spot Size
- 13 Reminders
- 14 Emissivity
- 15 Non-Contact Voltage
- 16 SPECIFICATION
- 17 TROUBLE SHOOTING
- 17 MAINTENANCE AND REPAIR
- 18 BATTERY REPLACEMENT