advertisement
![Storage. Ariens 921025 | Manualzz Storage. Ariens 921025 | Manualzz](http://s3.manualzz.com/store/data/023102568_1-d0b1b405ce4b811a11a34883f2cf4df3-360x466.png)
STORAGE
WARNING: AVOID INJURY.
Read and understand the Safety
section before proceeding.
START-OF-SEASON FUEL
PREPARATION
Before opening the fuel valve for the first time after long-term storage, add fresh, stabilizertreated fuel to the fuel tank and any fuel containers with remaining fuel.
SHORT TERM
1. Tighten all hardware to correct specifications.
2. Inspect unit for visible signs of wear or damage. Repair as needed.
3. Apply a light layer of oil or anti-rust compound on bare metal areas.
4. Prepare fuel system for storage.
NOTICE: Ariens recommends using a quality fuel stabilizer in all fuel. Gasoline left in the fuel system without a stabilizer, even for short periods of time, deteriorates and leaves gummy deposits in the system that may damage the carburetor and fuel hoses, filter and tank. For the best effectiveness, add stabilizer to all fuel containers whenever purchasing fuel. Add the stabilizer to the container before adding fuel.
a. Add Ariens fuel stabilizer (see Service
Parts on page 18) or equivalent
according to manufacturer's instructions to the fuel tank and any fuel containers with remaining fuel.
b. Run engine outdoors for at least
5 minutes to allow stabilizer to reach the carburetor.
5. Close fuel valve and allow engine to stop on its own.
6. Set engine switch to off position and remove key.
7. Store unit in a cool, dry, protected area.
Do not store unit outdoors.
LONG TERM
1. Perform all short-term storage items.
2. Clean unit thoroughly with mild soap and low-pressure water.
IMPORTANT: Never spray unit with highpressure water.
3. Lubricate as directed in Maintenance on page 15.
4. Touch up all scratched painted surfaces.
5. Remove weight from wheels by putting blocks under frame or axle.
6. Store unit in a cool, dry, protected area.
Do not store unit outdoors.
ACCESSORIES
See your Ariens dealer for a complete list of compatible accessories and attachments for your unit.
Description
Snow Cab
Turf Caster Brush Kit
Tire Chain Set
Part No.
72102600
72101200
72101600
EN - 24
advertisement
Related manuals
advertisement
Table of contents
- 3 Welcome
- 4 Safety
- 4 Practices & Laws
- 4 Emission Control System
- 4 Required Operator Training
- 4 Safety Alert Symbol
- 4 Signal Words
- 5 Safety Decals
- 6 Safety Rules
- 10 Assembly
- 10 Unpack Unit
- 12 Controls & Features
- 13 Engine Switch
- 13 Fuel Valve
- 13 Electric Start Button
- 13 Choke Control Lever
- 13 Throttle Control Lever
- 13 Speed Selector Lever
- 13 Attachment Clutch Lever (Right Side)
- 14 Traction Drive Clutch Lever (Left Side)
- 14 Brush Lock Trigger
- 14 Dual Handle Interlock
- 14 Operation
- 14 Emergency Stopping
- 14 Before Operating Unit
- 14 Start The Engine
- 15 Operate Unit
- 15 Stop the Engine
- 15 Set Brush Height
- 16 Set Brush Angle
- 16 Transport Unit
- 17 Maintenance
- 17 Service Position
- 19 Return Unit to Operating Position
- 20 Maintenance Schedule
- 20 Service Parts
- 20 Check Dual Handle Interlock
- 20 Check Fasteners
- 20 Check Clutch Cable Adjustments
- 20 Check Tire Pressure
- 20 Check Engine Oil
- 20 Change Engine Oil
- 20 Clean Recoil Guard Foam Cover
- 21 Lubricate Unit
- 22 Adjustments
- 22 Adjust Speed Selector Lever
- 23 Adjust Attachment Clutch & Brake
- 25 Adjust Traction Drive Clutch
- 26 Storage
- 26 Short Term
- 26 Long Term
- 26 Start-of-Season Fuel Preparation
- 26 Accessories
- 27 Troubleshooting
- 29 Specifications
- 30 Warranty