Appendix – Connection settings (Overview)
31
Connection settings (Overview)
The chart on the following pages gives an overview of the possible connection settings and parameters.
For further details, you may also refer to the Connectivity Guide for PostBase on the FP homepage.
Connection Type
E
THERNET
DHCP
DHCP = E
NABLED
DHCP = D
ISABLED
LAN connection. PostBase Mini connects to the
Francotyp-Postalia Infrastructure (FPI) via the internet.
(default setting, not changeable)
Dynamic Host Configuration Protocol. Networking protocol that allows automatic connection to a network.
Select this setting if your network supports
DHCP.
(default setting)
Select this setting if your network does not support DHCP.
During manual configuration, you will need to enter the following parameters:
– Static IP address for your PostBase Mini
– Subnet mask
– Default gateway
– IP address of the DNS server.
Please contact you network administrator for details.
Note: When entering IP addresses, you have to enter the dots, too.
32
PostBase Mini
Proxy-Server
P
P
ROXY
ROXY
= D
= E
ISABLED
Proxy-Authentication
(only when Proxy = Enabled)
D
E
ISABLED
NABLED
NABLED
Intermediary server that facilitates access to the internet.
Select this setting if your network does not use a proxy server.
(default setting)
Select this setting if your network uses a proxy server.
You will need to enter the following parameters:
– IP address of the proxy or its alias
– Port number
Please contact you network administrator for details.
Access control to the proxy server (user name and password).
Select this setting if your proxy server does not require authentication (user name and password).
(default setting)
Select this setting if your proxy server does require authentication.
You will need to enter the following parameters:
– User name for proxy access
– Password.
Please contact you network administrator for details.
In case your network only supports explicitly authorised devices, your network administrator will require the MAC address of your PostBase Mini. You can find it in the System Information in the Menu.
Appendix – Connection settings (Overview)
33
Reference Information for Network Administrators
The PostBase Mini requires (preferably) an Ethernet connection, with a minimum of
10 Mbit/sec, in order to able to download postal funds from a Francotyp-Postalia server. Ethernet cables of class CAT5E are recommended. For this it normally uses
TCP/IP (v4 only) through an https connection using TLS v1.2 over port 443. In certain cases it may also use an http connection over port 80.
These two ports must therefore be enabled in any firewall. It will attempt to make a connection to *.francotyp.com.
34
PostBase Mini
Appendix – Technical Data
35
Technical Data
Dimensions
– Length
– Width / Depth
– Height
Weight
Power supply
Power connection
Power consumption
310 mm (12.2")
205 mm (8.1")
230 mm (9.1")
3,0 kg (6.6 lbs)
24 VDC / 0.7 A (using an external power supply unit)
Protection class III
External Power Supply Unit:
XP POWER LTD. - VEH40US24
100 - 240 V / 0,93 A / 47 - 63 Hz
40 W (Energy Star certification intended)
<1 W (switched off)
<7 W (standby)
3,6 V / 2 Ah / 20 mA (order no. 90.4701.8004.00)
TFT, 320 x 240 pixels, with touch panel, backlit
Battery
Display
Print system
– Print technology
– Printing area
– Print resolution
Weighing area
Performance
Noise emission
Operating conditions
Ink-jet, 1 ink cartridge
133 mm x 25 mm (5.2" x 1")
300 dpi
3 g to 2.000 g / 0.1 oz to 5 lb
Up to 15 letters/minute
54.5 dB(A)
+15 °C to +35 °C (59 °F to 95 °F)
Only use in closed rooms
Do not expose to direct sunlight
Rel. humidity 15 % to 80 %, non-condensing
Subject to short-term modification.
36
PostBase Mini
Equipment
Subject to short-term modification.
Appendix – Technical Data
37
Ink cartridge
Ink cartridge
FP ink cartridge for PostBase Mini
(ink colour depending on country)
Operating and storage conditions
+15 °C to +35 °C (59 °F to 95 °F)
Only use in closed rooms
Do not expose to direct sunlight
Rel. humidity 20 % to 70 %, non-condensing
Safety data sheet for users available at http://www.francotyp.com/en/ mail-management/material-safety-data-sheets-msds.html.
Mail piece specifications
Format
Postcard to ISO B4 envelope
Thickness
Up to 6 mm (up to 0.23")
Material
Labels
Ink-absorbent material (suitable for ink-jet printing)
No dark paper
No glossy coating on the surface to frank
No corrugated board
No extremely fibrous paper on which the franking imprint could smear
Self-adhesive labels for PostBase Mini, minimum label size 140 mm x 85 mm (5.5" x 3.4")
Subject to short-term modification.
38
PostBase Mini
Declaration of conformity
Appendix – License
39
License
This is a copy of the current LICENSE file inside the CVS repository.
LICENSE ISSUES
==============
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of
the OpenSSL License and the original SSLeay license apply to the toolkit.
See below for the actual license texts. Actually both licenses are BSD-style
Open Source licenses. In case of any license issues related to OpenSSL
please contact [email protected].
OpenSSL License
---------------
/* ====================================================================
* Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* [email protected].
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
40
PostBase Mini
* This product includes cryptographic software written by Eric Young
* ([email protected]). This product includes software written by Tim
* Hudson ([email protected]).
*
*/
Original SSLeay License
-----------------------
/* Copyright (C) 1995-1998 Eric Young ([email protected])
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young ([email protected]).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson ([email protected]).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young ([email protected])"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson ([email protected])"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
Appendix – Security Declaration for data usage
41
Security Declaration for data usage
Product Description: PostBase Mini franking machine
The PostBase Mini franking machine is connected to the user’s local network through an Ethernet interface to share data with the Francotyp-Postalia Data Centre using both the local network and a suitable available internet connection provided by the user.
Francotyp-Postalia guarantees that the PostBase Mini franking machine does not utilise, transmit, or sort any data from the user’s network which is not relevant for the operation of this equipment.
United States Patents
US-Patent-Nr. 5.671.146, 6.579.019, 6.594.648, 6.615.196, 6.623.189, 6.692.166,
6.709.087, 6.771.179, 6.821.040, 7.043.631, 7.103.583, 7.322.764, 7.343.359,
7.606.264, 7.694.010, 7.724.905, 7.996.884, 8.131.959, 8.205.088
42
PostBase Mini
Customer Support / Warranty
43
Customer Support / Warranty
Customer Support
Every PostBase Mini is thoroughly checked before leaving the factory. Should any faults occur with your PostBase Mini in spite of our extensive quality control, please contact Francotyp-
Postalia help line.
FP INC. US
Consumable order phone number: 800-341-6052
Service phone number: 800-341-6052
Internet: www.fp-usa.com
Customer Resource Center:
http://www.fp-usa.com/postbasemini.cfm
ReportOne/RemoteOne Download Center:
http://www.fp-usa.com/remoteone.cfm
FP Canada Inc.
Please contact your local FP-partner
Customer Resource Center: http://www.francotyp.ca/support/postbasemini.htm
Francotyp-Postalia Ltd.
Consumable order phone number: please contact your local
FP-partner
Customer Support phone number: 0344 225 2233
Internet: www.fpmailing.co.uk
Customer Resource Centre: http://www.postbasemini.co.uk
fp-francotyp.com
Warranty
For warranty information, refer to the country-specific addendum to the PostBase Mini Operator Manual (if available in
your country).
