- No category
![](http://s3.manualzz.com/store/data/023214014_1-901c3a239d038eeac99736211b2d66b5-128x128.png)
advertisement
![Mini Milling/Drilling Machine | Manualzz Mini Milling/Drilling Machine | Manualzz](http://s3.manualzz.com/store/data/023214014_1-901c3a239d038eeac99736211b2d66b5-360x466.png)
CHAPTER 1 SPECIFICATION
This is a mini vertical milling machine with multiple functions on either face mill or drill.
There are various sizes and kinds of cutter currently. It’s easy to purchase, that can apply different to insure you work more accurate and more efficient as long as you change the cutter upon your demand.
1-1 Machine Specification
SPECIFICATION
Max.table travel
Max.cross slide
Max.spindle travel
10"/12(250/300mm)
4"/5" (100/130mm)
7" (180mm)
Spindle Speed
Taper of hole in spindle *
Drilling Capacity
End Milling Capacity
L:50-1100rpm H:120-2500rpm
MT #3 or R8
1/2" (13mm)
5/8" (16mm)
Face Milling Capacity
Machine Weight
11/8" (30mm)
GW:80Kg NW:62Kg
Remark: The item marked(*)has different choice, see the label in front of the machine or ask information to your dealer.
3
□
T-Slot Specification (mm)
T-SLOT T-NUT
1-2 Packing list of Accessories
1. large wrench S:36 1
2. Drill chuck & taper shank 1
3. Oil can 1
4. Fixing Pin 1
5. L Hex. Wrench S: 2,2.5,3,4,5,6,8 4
6. Socket head wrench D: 45-52 1
7. Double end wrench 8-10, 13-16 1
8. Drill chuck holder 1
9. Handle 3
10. T-Nut 4
11. Nut 4
12. Bolt 4
13. Fuse 8A (110V) or 5A (230V) 1
14. Draw bar 1
4
advertisement