Beep Alerts. Buffalo Tech TeraStation 5000

Add to My manuals
181 Pages

By default, the TeraStation adjusts its clock automatically by using a default NTP server. This NTP server belongs to

Internet Multi Feed Inc. For more information, visit www.jst.mfeed.ad.jp.

To use a different NTP server, select Name/Time/Language from Management. Click Time, then Edit. Uncheck “Use

Default NTP Server” and enter a new NTP IP address. Click OK.

If an NTP server is specified by name instead of IP address, make sure that a DNS server is configured for the

TeraStation.

Note: The internal clocks of the TeraStation and other devices on your network may run at slightly different speeds.

Over a long period of time your network devices may show somewhat different times, which can cause network problems. If clocks on your network vary by more than 5 minutes it may cause unexpected behavior. For best results, keep all clocks on the network set to the same time by adjusting them regularly, or use an NTP server to correct them all automatically.

Click the Language tab. Select the language to be used and click OK.

Note: This tab changes the language used by the TeraStation for email notifications, DLNA, and other functions. To change the language displayed in Settings, go to Advanced Settings or Easy Admin and click Language in the menu bar. Choose your desired language from the drop-down menu.