Version history. Fagor CNC 8055 para otras aplicaciones, CNC 8055 para fresadoras, CNC 8055 for milling machines, CNC 8055 for other applications
Add to My manuals158 Pages
advertisement
VERSION HISTORY
Here is a list of the features added in each software version and the manuals that describe them.
The version history uses the following abbreviations:
INST Installation manual
PRG
OPT
Programming manual
Operating manual
OPT-MC
OPT-TC
OPT-CO
Operating manual for the MC option.
Operating manual for the TC option.
Manual of the CO manual
Software V01.00
First version.
October 2010
Software V01.20
List of features
Open communication.
Improvements to Look Ahead machining.
Blocks with helical interpolation in G51.
G84. Tapping with relief.
Software V01.08
List of features
S.m.p. OPLDECTI (P86).
Software V01.30
List of features
Gear ratio management on Sercos spindles
Improved feedrate limit management (FLIMIT).
New type of penetration in lathe type threading cycles.
Improved lathe type thread repair. Partial repair.
MC option: Rigid tapping with relief.
TC option: New type of penetration in threading cycles.
TC option: Improved thread repair. Partial and multi-entry (start) thread repair.
TC option: Zig-zag entry to the groove at the starting point of the groove.
April 2011
Manual
INST
INST
PRG
PRG
August 2011
Manual
INST
September 2011
Manual
INST
INST
PRG
PRG
OPT-MC
OPT-TC
OPT-TC
OPT-TC
CNC 8055
CNC 8055i
·9·
CNC 8055
CNC 8055i
·10·
Software V01.31
List of features
CNC 8055 FL Engraving model
Software V01.40
List of features
Execution of M3, M4 and M5 using PLC marks
Values 12 and 43 of variable OPMODE in conversational work mode.
Software V01.60
List of features
Auto-adjustment of axis machine parameter DERGAIN
New value for axis machine parameter ACFGAIN (P46)
Value 120 of the OPMODE variable.
Software V01.65
List of features
Block processing time of 1 ms on the "CNC 8055i FL Engraving" model
October 2011
Manual
INST / OPT/ PRG
January 2012
Manual
INST / PRG
INST / PRG
December 2013
Manual
INST
INST
INST / PRG
January 2015
Manual
INST / OPT/ PRG
advertisement
Related manuals
advertisement
Table of contents
- 5 About the product
- 7 Declaration of conformity
- 9 Version history
- 11 Safety conditions
- 15 Warranty terms
- 17 Material returning terms
- 19 Additional remarks
- 21 Fagor documentation
- 23 Keyboard
- 25 General concepts
- 28 P999997 text program management
- 29 Power-up
- 30 Working in M mode with the MC keyboard
- 30 Video off
- 30 Managing the CYCLE START key
- 32 Introduction
- 32 Standard screen of the MC mode
- 34 Special screen of the MC mode
- 36 Standard screen of the MC mode. Configuration of two and half axes
- 38 Selecting a program for simulation or execution
- 39 Axis control
- 39 Work units
- 39 Coordinate preset
- 39 Managing the axis feedrate (F)
- 40 Home search
- 41 Zero offset table
- 42 Jog movement
- 42 Moving an axis to a particular position (coordinate)
- 42 Incremental movement
- 43 Continuous movement
- 44 Path-jog
- 46 Movement with an electronic handwheel
- 47 Feed handwheel
- 48 Path-handwheel
- 49 Tool control
- 51 Tool change
- 53 Variable tool change point
- 54 Tool calibration
- 55 Define the tool in the tool table (level 1)
- 57 Tool calibration without a probe (level 1)
- 59 Tool calibration with a probe (level 2)
- 61 Part centering with / without a probe (level 3)
- 65 Tabletop probe calibration (level 4)
- 67 Spindle control
- 68 Controlling the external devices
- 69 ISO management
- 73 Operation editing mode
- 74 Definition of machining conditions
- 75 Safety plane
- 76 Cycle level
- 77 Simulating and executing the operation
- 78 Background cycle editing
- 79 Profile milling operation
- 80 Definition of data
- 82 Profile definition (level 2)
- 83 Surface milling and slot milling operations
- 84 Defining the surface milling data
- 85 Defining the grooving data
- 87 Pocket cycle with a profile
- 89 Definition of data
- 90 Profile definition
- 91 Profile definition examples
- 96 Rectangular and circular boss cycles
- 97 Definition of data
- 99 Rectangular and circular pocket cycles
- 101 Definition of data
- 103 Positioning (2 levels)
- 104 Definition of data
- 105 Boring operation
- 106 Definition of data
- 107 Reaming operation
- 108 Definition of data
- 109 Tapping operation
- 110 Definition of data (threading)
- 112 Definition of data (thread milling)
- 114 Drilling and center punching operations
- 116 Definition of data
- 117 Tool withdrawal
- 118 Multiple positioning
- 120 Multiple positioning in several locations
- 121 Multiple positioning in a straight line
- 122 Multiple positioning in an arc
- 124 Multiple positioning in a rectangular pattern
- 125 Multiple positioning in a grid pattern
- 128 Editing blocks in ISO mode
- 129 Programming assistance
- 129 Zero offsets and presets
- 129 Work zones
- 129 Place labels and repetitions from label to label
- 130 Mirror image
- 130 Scaling factor
- 130 Coordinate rotation
- 131 Plane change
- 134 List of saved programs
- 135 See the contents of a program
- 136 Seeing one of the operations in detail
- 137 Edit a new part-program
- 138 Saving an ISO block or a cycle
- 139 Delete a new part program
- 140 Copying a part-program into another one
- 141 Modify a part-program
- 142 Delete an operation
- 143 Add or insert a new operation
- 144 Move an operation to another position
- 145 Modify an existing operation
- 146 Managing programs using the explorer
- 148 Simulating or executing an operation or cycle
- 149 Simulating or executing a part-program
- 150 Simulating or executing a portion of a part-program
- 151 Simulating or executing an operation that has been saved
- 152 Execution mode
- 153 Tool inspection
- 154 Graphic representation