Simulating and executing the operation. Fagor CNC 8055 para otras aplicaciones, CNC 8055 para fresadoras, CNC 8055 for milling machines, CNC 8055 for other applications

Operating manual

3.2

Simulating and executing the operation

All the operations or cycles have 2 work modes; execution and editing.

• Press [ESC] to switch from editing mode to execution mode.

• Press [ESC] to switch from executing mode to editing mode.

Editing mode Execution mode

The operation or cycle may be simulated in either mode. To do that, press the

[GRAPHICS] key.

To execute the operation or cycle, select the execution mode and press [START].

For further information on simulating and executing cycles, see the chapter

"6 Execution and simulation"

.

3.

CNC 8055

CNC 8055i

·MC· O

PTION

S

OFT

: V01.6

X

·77·