Delete an operation. Fagor CNC 8055 para otras aplicaciones, CNC 8055 para fresadoras, CNC 8055 for milling machines, CNC 8055 for other applications
Add to My manuals158 Pages
advertisement
▼
Scroll to page 2
of
158
5.
Operating manual
5.7.1
Delete an operation
To delete an operation, proceed as follows:
1.
Select, with the pointer, the operation to be deleted from the right column.
2.
Press [CLEAR].
The bottom of the screen will show a message requesting confirmation of the deleting operation.
• If [ENTER] is pressed, the CNC will delete the selected operation and will update the right column.
• If [ESC] is pressed, the operation will not be deleted and it will quit deleting operation.
CNC 8055
CNC 8055i
·MC· O
PTION
S
OFT
: V01.6
X
·142·
advertisement
Related manuals
advertisement
Table of contents
- 5 About the product
- 7 Declaration of conformity
- 9 Version history
- 11 Safety conditions
- 15 Warranty terms
- 17 Material returning terms
- 19 Additional remarks
- 21 Fagor documentation
- 23 Keyboard
- 25 General concepts
- 28 P999997 text program management
- 29 Power-up
- 30 Working in M mode with the MC keyboard
- 30 Video off
- 30 Managing the CYCLE START key
- 32 Introduction
- 32 Standard screen of the MC mode
- 34 Special screen of the MC mode
- 36 Standard screen of the MC mode. Configuration of two and half axes
- 38 Selecting a program for simulation or execution
- 39 Axis control
- 39 Work units
- 39 Coordinate preset
- 39 Managing the axis feedrate (F)
- 40 Home search
- 41 Zero offset table
- 42 Jog movement
- 42 Moving an axis to a particular position (coordinate)
- 42 Incremental movement
- 43 Continuous movement
- 44 Path-jog
- 46 Movement with an electronic handwheel
- 47 Feed handwheel
- 48 Path-handwheel
- 49 Tool control
- 51 Tool change
- 53 Variable tool change point
- 54 Tool calibration
- 55 Define the tool in the tool table (level 1)
- 57 Tool calibration without a probe (level 1)
- 59 Tool calibration with a probe (level 2)
- 61 Part centering with / without a probe (level 3)
- 65 Tabletop probe calibration (level 4)
- 67 Spindle control
- 68 Controlling the external devices
- 69 ISO management
- 73 Operation editing mode
- 74 Definition of machining conditions
- 75 Safety plane
- 76 Cycle level
- 77 Simulating and executing the operation
- 78 Background cycle editing
- 79 Profile milling operation
- 80 Definition of data
- 82 Profile definition (level 2)
- 83 Surface milling and slot milling operations
- 84 Defining the surface milling data
- 85 Defining the grooving data
- 87 Pocket cycle with a profile
- 89 Definition of data
- 90 Profile definition
- 91 Profile definition examples
- 96 Rectangular and circular boss cycles
- 97 Definition of data
- 99 Rectangular and circular pocket cycles
- 101 Definition of data
- 103 Positioning (2 levels)
- 104 Definition of data
- 105 Boring operation
- 106 Definition of data
- 107 Reaming operation
- 108 Definition of data
- 109 Tapping operation
- 110 Definition of data (threading)
- 112 Definition of data (thread milling)
- 114 Drilling and center punching operations
- 116 Definition of data
- 117 Tool withdrawal
- 118 Multiple positioning
- 120 Multiple positioning in several locations
- 121 Multiple positioning in a straight line
- 122 Multiple positioning in an arc
- 124 Multiple positioning in a rectangular pattern
- 125 Multiple positioning in a grid pattern
- 128 Editing blocks in ISO mode
- 129 Programming assistance
- 129 Zero offsets and presets
- 129 Work zones
- 129 Place labels and repetitions from label to label
- 130 Mirror image
- 130 Scaling factor
- 130 Coordinate rotation
- 131 Plane change
- 134 List of saved programs
- 135 See the contents of a program
- 136 Seeing one of the operations in detail
- 137 Edit a new part-program
- 138 Saving an ISO block or a cycle
- 139 Delete a new part program
- 140 Copying a part-program into another one
- 141 Modify a part-program
- 142 Delete an operation
- 143 Add or insert a new operation
- 144 Move an operation to another position
- 145 Modify an existing operation
- 146 Managing programs using the explorer
- 148 Simulating or executing an operation or cycle
- 149 Simulating or executing a part-program
- 150 Simulating or executing a portion of a part-program
- 151 Simulating or executing an operation that has been saved
- 152 Execution mode
- 153 Tool inspection
- 154 Graphic representation