advertisement
40
En
Setting the Digital Output
The type of digital signal that corresponds to the amplifier connected to this player can be selected. Be careful because noise may occur when the appropriate setting is not made.
Read this together with the operation manual of the amplifier that you have.
DVD .
Dolby Digital Output
DVD .
DTS Output
When the connected amplifier does not support Dolby Digital*, set to [Dolby Digital
3 PCM].
When the connected amplifier supports DTS**, set to [DTS].
Press
SETUP
.
The initial setup menu is displayed.
Press
SETUP
.
The initial setup menu is displayed.
Select [Audio 1].
Select [Audio 1].
Select [DTS Out].
Select [Dolby Digital Out].
Press the cursor button
(right direction).
Press the cursor button
(right direction).
Select the preferred item.
Select the preferred item.
Press
ENTER
.
Press
ENTER
.
Audio1
2
Video
Language
General
Dolby Digital Out -
DTS Out -
Dolby Digital
Dolby Digital
3 PCM
96kHz PCM Out - 96kHz
3 48kHz
MPEG Out - MPEG
3 PCM
Digital Out - Off
Move
SETUP
Exit
Dolby Digital: Select when connected to an amplifier or decoder that supports
Dolby Digital.
(Setting when shipped)
Dolby Digital
3 PCM: Converts a Dolby Digital signal to a linear PCM signal and outputs.
Select when connected to an amplifier that does not support Dolby
Digital.
Press
SETUP
.
Audio1 2 Video Language General
Dolby Digital Out Dolby Digital
DTS Out -
Off
96kHz PCM Out - DTS
MPEG Out - MPEG
3 PCM
Digital Out - Off
Move
SETUP
Exit
Off: Select when connected to an amplifier that does not support DTS. (Setting when shipped)
DTS: Select when connected to an amplifier or decoder that supports DTS.
Press
SETUP
.
**
“DTS” and “DTS Digital” are trademarks of Digital Theater
Systems, Inc. Manufactured under license from Digital
Theater Systems, Inc.
DVD .
96 kHz PCM Output
When the connected amplifier supports 96 kHz, set to (96 kHz).
This setting cannot be changed during playback.
Press
SETUP
.
The initial setup menu is displayed.
Select [Audio 1].
Select [96kHz PCM Out].
DVD .
MPEG Output
When the connected amplifier supports MPEG, set to (MPEG).
Press
SETUP
.
The initial setup menu is displayed.
Select [Audio 1].
Select [MPEG Out].
Press the cursor button
(right direction).
Select the preferred item.
Press
ENTER
.
Press the cursor button
(right direction).
Select the preferred item.
Press
ENTER
.
Audio1 2 Video Language General
Dolby Digital Out Dolby Digital
DTS Out -
Off
96kHz PCM Out - 96kHz
3 48kHz
MPEG Out - 96kHz
Digital Out - Off
Move
SETUP
Exit
96 kHz
3 48 kHz: Down-samples a 96 kHz signal to 48 kHz and outputs. Select when connected to an amplifier that does not support 96 kHz.
96 kHz:
(Setting when shipped)
Select when connected to an amplifier or DAC that supports 96 kHz.
Press
SETUP
.
Audio1
2
Video
Language
General
Dolby Digital Out Dolby Digital
DTS Out - Off
96kHz PCM Out - 96kHz
3 48kHz
MPEG Out - MPEG
Digital Out - MPEG
3 PCM
Move
SETUP
Exit
MPEG: Select when connected to an amplifier or decoder that supports MPEG.
MPEG
3 PCM:Converts an MPEG signal to a linear
PCM signal and outputs. Select when connected to an amplifier that does not suppor ts MPEG. (Setting when shipped)
Press
SETUP
.
41
En
advertisement
Related manuals
advertisement