41102IU-MN

ENGLISH 27

Problem Possible cause

The oven does not heat up.

The necessary settings are not set.

The lamp does not operate.

The lamp is defective.

The display shows "12.00".

There was a power cut.

Steam and condensation settle on the food and in the cavity of the oven.

You left the dish in the oven for too long.

Remedy

Make sure that the settings are correct.

Replace the lamp.

Reset the clock.

Do not leave the dishes in the oven for longer than 15 -

20 minutes after the cooking process ends.

12.2 Service data

If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre.

The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.

We recommend that you write the data here:

Model (MOD.)

Product number (PNC)

Serial number (S.N.)

.........................................

.........................................

.........................................

13. INSTALLATION

WARNING!

Refer to Safety chapters.

13.1 Technical data

Dimensions

Height

Width

Depth

894 - 912 mm

600 mm

600 mm

13.2 Location of the appliance

You can install your freestanding appliance with cabinets on one or two sides and in the corner.

B

A

Minimum distances

Dimension mm

A 2

B 685

A