Services Configuration
Telnet/SSH
Use the Telnet or SSH protocol to connect to any AirLink gateway and send AT commands.
A secure mechanism to connect remote clients is a requirement for many users.
In ACEmanager, Secure Shell (SSH) is supported to ensure confidentiality of the information and make the communication less susceptible to snooping and man-in-the-middle attacks. SSH also provides for mutual authentication of the data connection.
Figure 9-15: ACEmanager: Services >Telnet/SSH
Field
Remote Login Server
Mode
Default Telnet User
Description
Select either Telnet (default) or SSH mode.
Select a default Telnet User name
Options are:
•
None—When you log into a Telnet session, you are prompted for a user name and password.
•
user—When you log into a Telnet session, you are prompted only for a password.
Telnet uses the default user name (user).
Note: The default user name is only for Telnet; not SSH.
Rev 1 Apr.17
233
