advertisement
4
Introduction
To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference.
This manual provides information on the operation and maintenance of your DVD player. Should the unit require service, contact an authorized service location.
About the Symbol Display
“ ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific DVD video disc.
Notes on Discs
Symbol Used in this Manual
The lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may constitute a risk of electric shock.
The exclamation point alerts you to the presence of important operating and maintenance
/ servicing instructions.
Indicates hazards likely to cause harm to the unit itself or other material damage.
Note:
Indicates special notes and operating features.
Tip:
Indicates tips and hints for making the task easier.
Handling Discs
Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.
A section whose title has one of the following symbols is applicable only to the disc represented by the symbol.
DVD
VCD
CD
MP3
WMA
JPEG
DivX
DVD and finalized DVD±R/RW
Video CDs
Audio CDs
MP3 Discs
WMA Discs
JPEG Discs
DivX Discs
Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.
Setting the Output Source
You must select one of your output sources (DVD or
VCR) to view on the TV screen.
• If you want to view output source of DVD deck:
Press DVD on the remote or DVD/VCR on the front panel until DVD indicator on the front panel lights and output source of DVD deck is viewed on the TV screen.
• If you want to view output source of VCR deck:
Press VCR on the remote or DVD/VCR on the front panel until VCR indicator on the front panel lights and output source of VCR deck is viewed on the TV screen.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- DVD player
- 185 W 5.1 channels
- Radio Data System (RDS)
Related manuals
advertisement
Table of contents
- 4 Introduction
- 4 Symbol Used in this Manual
- 4 Symbol Display
- 4 Notes on Discs
- 4 Handling Discs
- 4 Storing Discs
- 4 Cleaning Discs
- 5 Types of Playable Discs
- 5 Regional code
- 6 Disc-related terms
- 7 Front Panel
- 8 Display Window
- 9 Remote Control
- 10 Rear Panel
- 11 Installation and Setup
- 11 (or another VCR Connections)
- 13 DVD/VCR Combi receiver
- 13 Radio Aerial Connections
- 14 Speaker System Connection
- 15 Speaker Positioning
- 16 Surround mode
- 16 Sound Mode
- 17 Before Operation-VCR part
- 17 Tuning in a video channel on your TV
- 17 Initial preset
- 18 Setting the clock Manually
- 18 To set the colour system
- 19 How to use the main menu
- 19 Tuning in TV stations Automatically
- 20 Tuning in TV stations Manually
- 21 Changing the order of TV stations
- 21 Deleting TV stations
- 22 Before Operation-DVD part
- 22 On-Screen Display
- 23 Initial Settings
- 23 General Operation
- 23 LANGUAGE
- 23 Menu Language
- 23 Disc Audio / Subtitle / Menu
- 24 DISPLAY
- 24 TV Aspect
- 24 Display Mode
- 24 Progressive Scan
- 24 TV Output Select
- 24 AUDIO
- 24 5.1 Speaker Setup
- 24 Dynamic Range Control (DRC)
- 24 Vocal
- 25 OTHERS
- 25 Auto Play
- 25 DivX(R) VOD
- 26 LOCK (Parental Control)
- 26 Rating
- 26 Password (Security Code)
- 26 Country Code
- 27 Operation
- 27 Playing a tape
- 27 CM (Commercial Message) Skip
- 27 OPR (Optimum Picture Response)
- 28 Instant Timer Recording (ITR)
- 29 ShowView Programming
- 30 Timer recording using On Screen Display
- 31 If Timer record events Overlap
- 31 Change (Deleting) the Timer Programme
- 32 Playing a DVD or Video CD
- 32 General Features
- 32 Moving to another TITLE
- 32 Moving to another CHAPTER/TRACK
- 32 Search
- 32 Changing the Audio Channel
- 33 Still Picture and Frame-by-Frame Playback
- 33 Slow Motion
- 33 Random
- 33 Repeat A-B
- 33 Repeat
- 33 3D Surround
- 33 Time Search
- 34 Marker Search
- 34 Special DVD Features
- 34 Title Menu
- 34 Disc Menu
- 34 Camera Angle
- 34 Changing the Audio Language
- 34 Subtitles
- 35 Playing an Audio CD or MP3/WMA Disc
- 36 Audio CD and MP3 / WMA Disc Features
- 36 Pause
- 36 Moving to another Track
- 36 Repeat Track/All/Off
- 36 Search
- 36 Random
- 36 Repeat A-B
- 36 3D Surround
- 37 Programmed Playback
- 37 Repeat Programmed Tracks
- 37 Erasing a Track from Program List
- 37 Erasing the Complete Program List
- 38 Viewing a JPEG Disc
- 38 Slide Show
- 38 Still Picture
- 38 Moving to another File
- 38 To rotate picture
- 38 To listen to MP3/WMA music watching picture
- 39 5.1 Speaker Setup
- 40 Playing a DVD VR format Disc
- 40 Maintenance and Service
- 41 Playing a DivX Movie Disc
- 42 Additional Features-VCR part
- 42 On Screen Display
- 42 Tape Counter Memory Stop
- 42 Friendly User Guide (Video Doctor)
- 43 Hi-Fi Stereo Sound System
- 43 Wide Screen Compatibility
- 43 To set the docoder
- 44 Additional Features
- 44 Last Scene Memory
- 44 Screen Saver
- 44 Video Mode Setting
- 45 Copying from DVD to VCR
- 45 Recording from another video recorder
- 46 Radio Operation
- 46 Presetting the Radio Stations
- 46 Listening to the Radio
- 46 To Clear the Stored Radio Stations
- 47 Tuning into a Station Manually
- 47 Tuning into a Station Automatically
- 47 RDS Operation
- 48 Reference
- 48 Language Codes
- 48 Country Codes
- 49 Troubleshooting
- 51 Specification