Hi-Fi Stereo Sound System. LG LH-CX245, LH-C360SE, LH-C360, LHS-36SEW, LHS-36SES

Hi-Fi Stereo Sound System

Your DVD/VCR Combi receiver will record and playback Hi-Fi stereo sound. In addition it has a stereo

NICAM digital stereo sound decoder. This allows you to record and playback the sound in several different ways. Video cassettes recorded on your DVD/VCR

Combi receiver will have a normal mono audio track and two VHS Hi-Fi stereo audio tracks. These stereo tracks allow you to make audio recordings in Hi-Fi stereo or bilingual mode from a TV broadcast, stereo audio system, video disc or another Hi-Fi VCR.

1. Your DVD/VCR Combi receiver’s NICAM digital sound decoder allows you to enjoy broadcasts with NICAM sound, as well as standard stereo, bilingual and mono sound. The particular type of sound received or that recorded will be briefly displayed on the TV screen for a couple of seconds:

STEREO NICAM

Sound is automatically recorded on the Hi-Fi stereo and mono tracks of the video tape.

BIL NICAM

Both audio channels will be recorded on the Hi-Fi stereo tracks. The primary language channel (left) will be recorded on the mono track of the video tape.

MONO

The sound is recorded on the Hi-Fi tracks and the mono track of the video tape without any separation.

2. Press AUDIO repeatedly until the desired audio mode appears.

3. The choice is STEREO, LEFT, RIGHT and

MONO. In BIL NICAM playback the primary language is output onthe left channel and the secondary channel is output simultaneously from the right channel when audio output is set to

STEREO.

The primary language willbe output from both channels when the audio setting is MONO.

Please note that when adjusting the tracking control Hi-Fi stereo sound may revert to MONO.

Wide Screen Compatibility 16:9

Your DVD/VCR Combi receiver can record and play back wide screen aspect ratio programmes (16:9). To record a wide screen format programme successfully the correct type of wide screen signal must be broadcast by the TV station.

1. Switch on your VCR.

Press i.

Press

F or

G to select 16:9/4:3.

Press OK.

REC

f

OSD

ON

OFF

16:9

4:3

Pr-12

ACMS

+ -

DECO-

DER

1 2

TIME

DATE

OPR

SYS-

TEM

NIC

VCR

Dr.

16:9

4:3

OK i

REC

f

OSD

ON

OFF

16:9

4:3

Pr-12

ACMS

+ -

DECO-

DER

1 2

TIME

DATE

SYS-

AUTO

NIC

OPR

4:3

16:9

VCR

Dr.

16:9

4:3

i

2. Press

D or

E repeatedly to select: AUTO, 4:3 or

16:9.

AUTO:

Automatically plays back Wide-Screen programmes as Wide-Screen and Normal programmes as normal.

4:3

Only for playing back and recording Normal format recordings (4:3).

16:9:

Only for playing back and recording Wide-Screen format recordings (16:9).

REC

f

OSD

Pr-12

ACMS

+ -

1 2

TIME

DATE

SYS-

AUTO

NIC

OPR

4:3

16:9

VCR

Dr.

16:9

4:3

i

3. Press i to remove the menus from the TV screen.

To enjoy Wide-Screen playback you must connect your DVD/VCR Combi receiver to the TV using a SCART cable.

To set the decoder

We have already described, how to connect a decoder for pay-TV station as CANAL+ or PREMIERE on page

11. For the recording of an encoded station you do not have to control anything. You just select the station and wait shortly until the decoding will start.

1. Press i.

The main menu will appear on the TV screen.

Press

F or

G to select the DECODER.

Press OK.

2. Press

D or

E to select.

ON: When the decoder is connected to the AV2 socket.

OFF: When another VCR is connected to the AV2 socket.

3. Press i to return to a TV picture.

43