EM-Connector. CMOSTEK CMT211xA CMT2110A, CMT211xA CMT2113A, CMT211xA CMT2117A, CMT211xA CMT2119A, CMT221xA CMT2210A, CMT221xA CMT2213A, CMT221xA CMT2217A, CMT221xA CMT2219A
पीडीएफ
दस्तावेज़
विज्ञापन
विज्ञापन
AN103
6. USB Programmer
The USB Programmer is the programming tool for the user to program the configuration into the CMOSTEK NextGenRF
TM products with the RFPDK. The evaluation modules should be connected to the PC through the USB Programmer. There are 3
LEDs on the USB Programmer to indicate its working status.
6.1 EM-Connector
The EM-Connector on the USB Programmer is 10-pin, 2.54 mm female connector as shown below.
6
8
10
2
4
1
3
5
7
9
Figure 7. EM-Connector
5
6
7
8
9
10
1
2
3
4
Table 7. Pin Descriptions of EM-Connector
Pin Number
CMT211xA
Reserved
GND
Reserved
VDD
CLK
Reserved
DATA
Reserved
Reserved
Reserved
Pin Functions
CMT221xA
CSB
GND
Reserved
VDD
SCL
Reserved
SDA
Reserved
Reserved
Reserved
6.2 LED Indicators
Table 8 for the descriptions of the LEDs.
Figure 8. LED Indicators on the USB Programmer
Rev 1.1 | Page 12/
22 www.hoperf.com
/
डाउनलोड
बस एक दोस्ताना अनुस्मारक. आप दस्तावेज़ को यहीं देख सकते हैं. लेकिन सबसे महत्वपूर्ण बात, हमारे एआई ने इसे पहले ही पढ़ लिया है. यह जटिल चीजों को सरल शब्दों में समझा सकता है, किसी भी भाषा में आपके सवालों के जवाब दे सकता है और सबसे लंबे या सबसे जटिल दस्तावेजों को भी जल्दी से नेविगेट करने में आपकी मदद कर सकता है.
विज्ञापन